Emax

there is a direct replacement vfd for the sp12 but its 

£65+vat and delivery which has the connections the same as the connector

but you have to file the pcb as the glass is larger to one side than the original
  ----- Original Message ----- 
  From: jammie 
  To: emax@yahoogroups.com 
  Sent: Saturday, September 29, 2012 7:41 PM
  Subject: Re: [emax] OLED group buy....


    
  yes they will

  but on the sp12 and sp1200 the wiring is reversed

  and its not a 14 pin dual line but a line row of pins

  also the sp1200 they did a convertor board and its wired backwards compared to the standard 14 pin dual row 

  on them they pin 1 is + vcc and pin 2 is ov

  i remove the conversion board and hard wire it like on the original design

  the row of connection goes

  14/13/12/11/10/9/8/7/6/5/4/3/2/1

  and on the oled it is

  1/2/3/4/5/6/7/8/9/10/11/12/13/14

  you can use the ones from the rapid online for this as they 

  are inline row and it has to be hard wired any way 
  ----- Original Message ----- 
  From: Juan Solo 
  To: emax@yahoogroups.com 
  Cc: emax@yahoogroups.com 
  Sent: Saturday, September 29, 2012 6:37 PM
  Subject: Re: [emax] OLED group buy....

  Hey everybody, sorry I haven't been paying attention to all these posts lately.. Just read one of the emails.. Do you all think one of these displays would work the same for an E-MU SP12? I need one for that. If so count me in, on either color!
  Peace!!
  RecordMonster 

  Sent from my iPhone

  On Sep 29, 2012, at 1:22 PM, krikor kouchian <krikorola@...> wrote:

  Ok so if you get 20 people and the yellow can work out count me in!
  if not i will look into doing the other way
  Thanks
  K

  Le samedi 29 septembre 2012, Ted Summers <djtbs1@...> a écrit :

  The other option is to get OLED from Rapid Online and wire it. It isn't
  impossible- just a lot easier if you can remove the inverter and drop in
  the replacement.

  I am also going to look into if I can make it so you wouldn't even have to
  mess with the inverter.
  However- some people the inverter makes hum or buzz, so getting rid of it
  isn't a bad idea....

  Thanks,
  Ted

  On Sat, Sep 29, 2012 at 9:53 AM, krikor kouchian <krikorola@...
  wrote:

  Sorry i didn't catch that, if there is any possibility of getting a white
  one i'd be interested, anyway yellow would do it also, but white ones
  seems
  nicer!

  Le samedi 29 septembre 2012, Ted Summers <djtbs1@...> a écrit :

  As previously posted ALL WHITE OLED have been spoken for.

  If people are willing to get a YELLOW OLED that is drop in, I can order
  up
  to 20 of those too, but I think I have to have 10 people to order the
  other
  color.

  Regards,
  Ted

  On Sat, Sep 29, 2012 at 8:28 AM, krikor kouchian <krikorola@...
  wrote:

  Even though i'm in france, i'm interested, i prefer to pay the
  shipping
  than buy one around here and do the mod.
  i can make a bank wire, paypal or cc, no prob!

  Le samedi 29 septembre 2012, Ted Summers <djtbs1@...> a écrit :

  PLEASE NOTE- This part per the mechanical / engineering
  specification
  sent
  by the manufacturer is a DROP IN REPLACEMENT as far as the
  electrical
  connection- NO WIRING will be necessary.

  You do need to remove the inverter like Jammie has stated
  previously.
  It doesn't use the High Voltage inverter for the EL backlight.

  Thanks,
  Ted

  On Sat, Sep 29, 2012 at 8:05 AM, Ted Summers <djtbs1@...>
  wrote:

  ALL-
  As previously detailed, all 20 WHITE OLED are spoken for.
  If someone doesn't actually pay, then I can put that display up as
  available.

  Since I am providing the items *AT COST* thus far, I will provide a
  little more detail:

  The OLED units (raw part) are $13.85 USD.
  There is a 3 to 4 week manufacturing lead time from order placement
  date.
  I expect them to not have headers, so will have to order those.
  I expect the headers to cost about $2 USD each (tin pins are about
  a
  $1,
  but would rather be sure of the good connection, so I prefer gold).
  I will be soldering them on and verifying each display works in my
  Emax
  testbed, so will charge $2 USD for this service.

  So at this point each display is $17.85 USD for the part itself,
  tested
  in
  Emax- without the shipping costs.

  There will be some shipping costs / fees from the OLED
  manufacturer.
  I will be spreading this evenly across the price of all 20
  displays.
  I will get clarification on the shipping soon, as I will place the
  order
  and be paying with Credit Card, this will be easy to deduce the
  final
  display cost.

  Be aware I can provide full disclosure of the costs associated if
  that
  becomes necessary, so you can see it.
  There is no jacking up of prices here (at least by me).
  The costs are the costs...
  I think most people here know what my reputation is from providing
  service
  with the SCSI kits and questions answered, etc.

  From the point discussed so far, there is shipping to the end
  person
  (YOU).
  This will be $5 USD for USPS priority mail here in the US per
  shipment
  address (not per display).
  Overseas, it will be $5 for first class post, unless you want
  tracking-
  that is o

  -- 
  http://www.krikor.fr
  +33632199413

  bookings:
  France/Suisse/Benelux: fanyktdj@gmail.com
  World: laetitia@...

  [Non-text portions of this message have been removed]

  ------------------------------------

  Emax and Emax II User's Group Website

  http://www.silveriafamily.comYahoo! Groups Links

  [Non-text portions of this message have been removed]

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]