Emax

you can create an new cable with the original connector but

you need an amp push down tool

and other end you need some new floppy mini molex crimps

and some cable 

the crimperts are £300+ in price for molex connectors

you can do a bodge type by using inline crimps and extending the cable that way but you would need 4 crimps for that

but if you are doing the a hd upgrade you will need to make a split for a male molex hd connector

it works out cheaper to by ready made cables than to start from scratch

once the crimpers are braught

its easy to make your money back but if your just doing 1 device then its cheaper to by cables and either get the corect extender gender changers 

or use connector blocks oe crimps to make a one off cable

with the correct molex connectors 
  ----- Original Message ----- 
  From: krikor kouchian 
  To: emax@yahoogroups.com 
  Sent: Tuesday, December 18, 2012 9:51 AM
  Subject: Re: [emax] Molex cable for scsi device


    
  yes Jammie i can imagine you knew that already! my answer was to Al,
  on my side i was thinking of recycling the original connector on pcb
  digital board side so there wouldn't be extenders going around. have you
  ever done that?

  Le mardi 18 décembre 2012, jammie <jammie.emma@....uk> a écrit :
  >
  >
  > the cables i use are correct
  >
  > as i use them not just foor emax but for all the sampler makes
  >
  > ensoniq
  >
  > yamaha
  >
  > akai
  >
  > emu
  >
  > roland
  >
  > korg
  > ----- Original Message -----
  > From: krikor kouchian
  > To: emax@yahoogroups.com
  > Sent: Tuesday, December 18, 2012 8:23 AM
  > Subject: Re: [emax] Molex cable for scsi device
  >
  > be careful as the connectors are not the same pinout!
  >
  > 1 on floppy/berg is +5V but 1 on scsi/molex is +12V
  >
  > http://en.wikipedia.org/wiki/Molex_connector
  >
  > http://en.wikipedia.org/wiki/Berg_connector
  >
  > Le mardi 18 décembre 2012, Krikor Kouchian <krikorola@...> a écrit :
  >>
  >>
  >> Hello,
  >> The male floppy I found is a pcb one, but I think I might use the
  > original floppy psu cable and modify it as the connector is a cable clip
  > in' type, this way I won't need the male floppy one.
  >> K
  >>
  >> http://www.krikor.fr
  >> +33632199413
  >>
  >> Le 18 déc. 2012 à 05:58, al <jedi_kngt@hotmail.com> a écrit :
  >>
  >>> I'm in the same bucket!!--looking for power supply to a coner hard disk,
  > until now I have not found where to get the floppy male cable
  >>> did you??
  >>>
  >>> - In emax@yahoogroups.com, Krikor Kouchian wrote:
  >>>
  >>> Thank you I'm gonna look into it!
  >>>
  >>> http://www.krikor.fr
  >>> +33632199413
  >>>
  >>> Le 16 déc. 2012 à 17:37, jammie a écrit :
  >>>
  >>> the only place i know that sells the male floppy to molex male hd is a
  > company from germany but its cheap £2.99
  >>>
  >>> but postage is 13 euro
  >>> ----- Original Message -----
  >>> From: Krikor Kouchian
  >>> To: emax@yahoogroups.com
  >>> Sent: Sunday, December 16, 2012 4:27 PM
  >>> Subject: [emax] Molex cable for scsi device
  >>>
  >>> Hi,
  >>> I did the scsi mod with Ted's package. I also installed the oled which
  > looks great!
  >>> I'm trying to find the correct cable to power up my scsi PCMCIA/CF
  > reader.
  >>> Also it's not really clear for me if I should use a split cable and use
  > the floppy power supply on the digital board or if I should connect to the
  > psu, and if so where exactly.
  >>> Best
  >>> K
  >>>
  >>> http://www.krikor.fr
  >>> +33632199413
  >>>
  >>> [Non-text portions of this message have been removed]
  >>>
  >>>
  >>>
  >>>
  >>> [Non-text portions of this message have been removed]
  >>>
  >>>
  >>
  >> [Non-text portions of this message have been removed]
  >>
  >>
  >> Reply via web post Reply to sender Reply to group Start a New Topic
  > Messages in this topic (6)
  >> Recent Activity:
  >>
  >> New Members 1
  >> New Polls 1
  >>
  >> Visit Your Group
  >> Emax and Emax II User's Group Website
  >>
  >>
  >
  > --
  > http://www.krikor.fr
  > +33632199413
  >
  > bookings:
  > France/Suisse/Benelux:
  >
  > __

  -- 
  http://www.krikor.fr
  +33632199413

  bookings:
  France/Suisse/Benelux: fanyktdj@...
  World: laetitia@...

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]