Emax

check for cold solder joints on the back as the pads copper plate is week and can crack

is it a light green board or dark green

the light green boards are the worst


  ----- Original Message ----- 
  From: philippe.69 
  To: emax@yahoogroups.com 
  Sent: Thursday, January 31, 2013 9:57 AM
  Subject: RE: [emax] Re: hello I encounter a problem with my emax II


    
  I already cleaned the contacts emax works except the masterbutton

  De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
  emuemax92
  Envoyé : jeudi 31 janvier 2013 02:01
  À : emax@yahoogroups.com
  Objet : [emax] Re: hello I encounter a problem with my emax II

  It sounds like two different problems.

  The masterbutton can be dirty (bad/dirty pad). Maybe a cleaning of the
  underneathside of masterbutton with some alcohol will work. As long with the
  contacts on the printboard.

  What do you mean with the emax is not being lit? The screen is not lit or
  the LED's don't light up?

  Regards,
  Frank

  --- In emax@yahoogroups.com , "Vavasseur
  Philippe" wrote:
  >
  > button master and ineffective
  > 
  > emax stay 2 months without being lit , master button no longer works
  > 
  > I check the contacts connection to mainboard they are all ok
  > you have an idea of the problem
  > it worked fine before
  > 
  > thanks,
  > philippe
  >

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]