Emax

It's definitely possible.  I recently bought an emax from ebay and the
person I bought it from said it was in working condition, except for 1
broken key.  When I got it, it had a couple of broken keys and the keyboard
didn't trigger...I could trigger sounds from another keyboard used as a midi
controller, but the emax keyboard didn't trigger.  It cost me almost as much
to get it repaired as it cost me originally.

-Aaron
----- Original Message -----
From: <emax@yahoogroups.com>
To: <emax@yahoogroups.com>
Sent: Tuesday, April 06, 2004 3:37 AM
Subject: [emax] Digest Number 613


>
> There are 2 messages in this issue.
>
> Topics in this digest:
>
>       1. Re: Creating Banks
>            From: "John Silveria" <emaxjs@...>
>       2. damaged emax?
>            From: "C. Brown" <jemappellechris@...>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 1
>    Date: Mon, 05 Apr 2004 10:57:12 -0400
>    From: "John Silveria" <emaxjs@...>
> Subject: Re: Creating Banks
>
> On 5 Apr 2004 at 3:11, bassgroovist spoke unto me:
>
> > how do i create a bank, then create and save multiple presets into
> > that bank?  I have the Manual, if it is in there i don't seem to find
> > it.
>
> The Emax series do not have bank management like the later series models
do. In the
> Emax a bank is nothing other than the current set of presets in memory
saved to one
> place. You can't even name them, typically the factory banks came with
Preset #99 set
> to the name of the bank. To create a bank from scratch you would typically
do a Master
> (4)Erase All, then use Preset Management (1)Load Preset to load the
individual presets
> from different saved banks into memory then store that as a separate bank.
>
> > Is there a way to save "stacked presets", in there stacked version, as a
> > preset of its own?  So then I can go to the new preset, with all of the
> > stacked presets ready to play.
>
> Nope, I'm pretty sure you have to do this the long way, load each
individual preset into
> the new bank the restack them. Another solution is to load the bank with
the stack

> preset you want then erase all the presets not being used.
>
> --
>                           John Silveria II
>                    AIM & Yahoo! Messenger: EmaxJS
>                         MSN: emaxjs@...
>      The Silveria Family Website & Emax and Emax II User's Group
>                     http://www.silveriafamily.com
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 2
>    Date: Mon, 05 Apr 2004 22:28:35 -0000
>    From: "C. Brown" <jemappellechris@...>
> Subject: damaged emax?
>
> hello, i'm a new user here and this is my first post.
>
> i had an emax ii for a couple of years, and it had some power
> problems that grew increasingly severe...i ended up deciding to
> buy another. the market for good used keys around here is fairly
> slim, so i decided to ebay it. the guy had a good rating and
> whatnot.
>
> here's my problem: when i load up the banks, i can get just the
> tiniest amount of output from the headphone out (and no other
> output). what little output i do get is very distorted, and there's an
> electrical sounding hum in the background. i've checked to make
> sure i'm on the correct voltage, which i am, and the guy from
> ebay insists that it was working and that this is just a preference
> that i can change. i'm beginning to grow doubtful of both of these,
> but could it possibly have taken a hit that could do this during
> shipping? if not, does anyone know what would cause this?
>
> thank you very much for your time,
> chris
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.com
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>