Emax

Hi, I tried for a while to get my emax se to receive SDS and I had no luck, 
I've done it with other samplers with no problems so I don't know, if you 
find out anything let me know as I'm interested aswell. Nicholas
> 
> Message: 2
>    Date: Thu, 8 Nov 2001 21:13:02 -0800
>    From: "John Silveria" <emaxjs@...>
> Subject: Re: sds help
> 
> You don't have to do anything on the Emax. You need to initiate the 
> dump/transfer from 
> your software. All you need to do with the Emax is make sure it's set to 
> the same MIDI 
> channel as your software is sending/receiving.
> 
> On 9 Nov 2001 at 1:08, daniel wrote:
> 
> > I need help. i can't remember what i have to do on Emax to get samples 
> via sds.
> > I am trying  doing: Master/special/6 but Emax does not react.Any idea?
> > 
> > daniel
> 




[Non-text portions of this message have been removed]

What exactly is the problem?  I haven't got an SE, I've got an Emax II, so I
suppose this might make a difference.  I just set up Soundforge to do an SDS
dump, having followed the "offset" instructions in the FAQ.  Basically, set
the sample offset to 9 to keep the midi notes the same between Soundforge
and the slightly odd Emax implementation.  Doing an SDS dump will only set
the sample up on one note - you need to tweak the voice assign stuff.  Make
sure that your SDS dumper is using the same midi channel as you set on
Master MIDI in the master menus.  That's what bit me the first couple of
times.
HTH
  Gordon.

----- Original Message -----
From: <Nicholasfaith@...>
To: <emax@yahoogroups.com>
Sent: Saturday, November 10, 2001 4:30 AM
Subject: Re: [emax] Digest Number 139


>
>
>   Hi, I tried for a while to get my emax se to receive SDS and I had no
luck,
> I've done it with other samplers with no problems so I don't know, if you
> find out anything let me know as I'm interested aswell. Nicholas

If you have an Emax-1 (SE or some thing) you need to change the 
sampling bit, from 16bit...

cheers/
niklas 

--- In emax@y..., "Gordon JC Pearce" <gordonjcp@f...> wrote:
> What exactly is the problem?  I haven't got an SE, I've got an Emax 
II, so I
> suppose this might make a difference.  I just set up Soundforge to 
do an SDS
> dump, having followed the "offset" instructions in the FAQ.  
Basically, set
> the sample offset to 9 to keep the midi notes the same between 
Soundforge
> and the slightly odd Emax implementation.  Doing an SDS dump will 
only set
> the sample up on one note - you need to tweak the voice assign 
stuff.  Make
> sure that your SDS dumper is using the same midi channel as you set 
on
> Master MIDI in the master menus.  That's what bit me the first 
couple of
> times.
> HTH
>   Gordon.
> 
> ----- Original Message -----
> From: <Nicholasfaith@a...>
> To: <emax@y...>
> Sent: Saturday, November 10, 2001 4:30 AM
> Subject: Re: [emax] Digest Number 139
> 
> 
> >
> >
> >   Hi, I tried for a while to get my emax se to receive SDS and I 
had no
> luck,
> > I've done it with other samplers with no problems so I don't 
know, if you
> > find out anything let me know as I'm interested aswell. Nicholas