Yahoo Groups archive
Thread
2011-11-07 by Francis Cote
Hi all, I have the opportunity to get a Powermac 9600 in great condition for cheap. While there are newer ways to transfer samples to the Emax 2, I'm really minded to make this work for at least nostalgic reasons! Can anyone tell me if it will work with the modem port on this machine, or do I really have to find something older than that? Thanks Francis [Non-text portions of this message have been removed]
2011-11-07 by jack
that should be fine as its the last of the nubus macs just make sure its os7 max
----- Original Message -----
From: Francis Cote
To: emax@yahoogroups.com
Sent: Monday, November 07, 2011 2:50 AM
Subject: [emax] Rs422.. again
Hi all,
I have the opportunity to get a Powermac 9600 in great condition for cheap.
While there are newer ways to transfer samples to the Emax 2, I'm really
minded to make this work for at least nostalgic reasons!
Can anyone tell me if it will work with the modem port on this machine, or
do I really have to find something older than that?
Thanks
Francis
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2011-11-07 by Louis van Dompselaar
I think you're mistaken, the 9600 is not a Nubus Mac, it is in fact the last (and greatest) of the Pre-G3 Macs and will run up to 9.1 (although I have used the "old world support" to run 9.2.2 on a 8600 so that should work on the 9600 as well). http://lowendmac.com/ppc/power-macintosh-9600.html Op 7 nov. 2011, om 09:28 heeft jack het volgende geschreven: > that should be fine as its the last of the nubus macs just make sure its os7 max > ----- Original Message ----- > From: Francis Cote > To: emax@yahoogroups.com > Sent: Monday, November 07, 2011 2:50 AM > Subject: [emax] Rs422.. again > > Hi all, > > I have the opportunity to get a Powermac 9600 in great condition for cheap. > While there are newer ways to transfer samples to the Emax 2, I'm really > minded to make this work for at least nostalgic reasons! > > Can anyone tell me if it will work with the modem port on this machine, or > do I really have to find something older than that? > > Thanks > > Francis > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]
2011-11-07 by jack
there were 2 version a nubus slot version and a power pc version ----- Original Message -----
From: "Louis van Dompselaar" <louis@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 8:31 AM Subject: Re: [emax] Rs422.. again >I think you're mistaken, the 9600 is not a Nubus Mac, it is in fact the >last (and greatest) of the Pre-G3 Macs and will run up to 9.1 (although I >have used the "old world support" to run 9.2.2 on a 8600 so that should >work on the 9600 as well). > > http://lowendmac.com/ppc/power-macintosh-9600.html > > > Op 7 nov. 2011, om 09:28 heeft jack het volgende geschreven: > >> that should be fine as its the last of the nubus macs just make sure its >> os7 max >> ----- Original Message ----- >> From: Francis Cote >> To: emax@yahoogroups.com >> Sent: Monday, November 07, 2011 2:50 AM >> Subject: [emax] Rs422.. again >> >> Hi all, >> >> I have the opportunity to get a Powermac 9600 in great condition for >> cheap. >> While there are newer ways to transfer samples to the Emax 2, I'm really >> minded to make this work for at least nostalgic reasons! >> >> Can anyone tell me if it will work with the modem port on this machine, >> or >> do I really have to find something older than that? >> >> Thanks >> >> Francis >> >> [Non-text portions of this message have been removed] >> >> [Non-text portions of this message have been removed] >> >> > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-07 by jack
there are nubus pds slot versions and the pci version if its the nubus pds version go for it as a audio media 2 card will fit it dont get the pci version as audio media 3 card did away with support for samplers in sounddesigner2 in the later software versions both can have operating systems up to os9 but you need os7 for sounddesigner to work best both can have excellerator cards making then g3 processor ----- Original Message -----
From: "Louis van Dompselaar" <louis@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 8:31 AM Subject: Re: [emax] Rs422.. again >I think you're mistaken, the 9600 is not a Nubus Mac, it is in fact the >last (and greatest) of the Pre-G3 Macs and will run up to 9.1 (although I >have used the "old world support" to run 9.2.2 on a 8600 so that should >work on the 9600 as well). > > http://lowendmac.com/ppc/power-macintosh-9600.html > > > Op 7 nov. 2011, om 09:28 heeft jack het volgende geschreven: > >> that should be fine as its the last of the nubus macs just make sure its >> os7 max >> ----- Original Message ----- >> From: Francis Cote >> To: emax@yahoogroups.com >> Sent: Monday, November 07, 2011 2:50 AM >> Subject: [emax] Rs422.. again >> >> Hi all, >> >> I have the opportunity to get a Powermac 9600 in great condition for >> cheap. >> While there are newer ways to transfer samples to the Emax 2, I'm really >> minded to make this work for at least nostalgic reasons! >> >> Can anyone tell me if it will work with the modem port on this machine, >> or >> do I really have to find something older than that? >> >> Thanks >> >> Francis >> >> [Non-text portions of this message have been removed] >> >> [Non-text portions of this message have been removed] >> >> > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-07 by Louis van Dompselaar
Odd that both lowendmac and MacTracker don't mention a Nubus 9600, only the 6 PCI slot version. Must be pretty rare too. Can you give us a link to the full specs? You should send this to MacTracker as it obviously a gave omission on their side! I have an Audiomedia card lying around and have been looking at getting a nubus Mac just for that but always thought that would require me to get a very old one. Op 7 nov. 2011, om 09:44 heeft jack het volgende geschreven: > there are nubus pds slot versions and the pci version > > if its the nubus pds version go for it as a audio media 2 card will fit it > > dont get the pci version as audio media 3 card did away with support for > samplers in sounddesigner2 in the later software versions > > both can have operating systems up to os9 but you need os7 for sounddesigner > to work best > > both can have excellerator cards making then g3 processor [Non-text portions of this message have been removed]
2011-11-07 by jack
no its my bad its the 9500 quadra that has the nubus slots thats the last big mac with nubus slots and works with the audiomedia 1/2 and soundtools
----- Original Message -----
From: Louis van Dompselaar
To: emax@yahoogroups.com
Sent: Monday, November 07, 2011 8:50 AM
Subject: Re: [emax] Rs422.. again
Odd that both lowendmac and MacTracker don't mention a Nubus 9600, only the 6 PCI slot version.
Must be pretty rare too.
Can you give us a link to the full specs? You should send this to MacTracker as it obviously a gave omission on their side!
I have an Audiomedia card lying around and have been looking at getting a nubus Mac just for that but always thought that would require me to get a very old one.
Op 7 nov. 2011, om 09:44 heeft jack het volgende geschreven:
> there are nubus pds slot versions and the pci version
>
> if its the nubus pds version go for it as a audio media 2 card will fit it
>
> dont get the pci version as audio media 3 card did away with support for
> samplers in sounddesigner2 in the later software versions
>
> both can have operating systems up to os9 but you need os7 for sounddesigner
> to work best
>
> both can have excellerator cards making then g3 processor
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2011-11-07 by jack
so dont bother with the 9600 as its pci based only and no support for samplers via sounddesigner2
----- Original Message -----
From: Louis van Dompselaar
To: emax@yahoogroups.com
Sent: Monday, November 07, 2011 8:50 AM
Subject: Re: [emax] Rs422.. again
Odd that both lowendmac and MacTracker don't mention a Nubus 9600, only the 6 PCI slot version.
Must be pretty rare too.
Can you give us a link to the full specs? You should send this to MacTracker as it obviously a gave omission on their side!
I have an Audiomedia card lying around and have been looking at getting a nubus Mac just for that but always thought that would require me to get a very old one.
Op 7 nov. 2011, om 09:44 heeft jack het volgende geschreven:
> there are nubus pds slot versions and the pci version
>
> if its the nubus pds version go for it as a audio media 2 card will fit it
>
> dont get the pci version as audio media 3 card did away with support for
> samplers in sounddesigner2 in the later software versions
>
> both can have operating systems up to os9 but you need os7 for sounddesigner
> to work best
>
> both can have excellerator cards making then g3 processor
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2011-11-07 by Louis van Dompselaar
Do you know if they fit the 8100? That is what I always understood to be the last PPC nubus Mac. http://lowendmac.com/ppc/power-macintosh-8100.html The cards are indeed massive. Op 7 nov. 2011, om 10:13 heeft jack het volgende geschreven: > no its my bad its the 9500 quadra that has the nubus slots > > thats the last big mac with nubus slots and works with the audiomedia 1/2 and soundtools > > > > [Non-text portions of this message have been removed]
2011-11-07 by jack
looks good has nubus slots and will work on system 7 faster processor 80-100mhz than the 9500 its in the same case as the quadra but can you get 1 thats the question as they are like rocking horse pooh like most of the quadra range as i wanted to up grade my path to the quadra but never been able to get 1
----- Original Message -----
From: Louis van Dompselaar
To: emax@yahoogroups.com
Sent: Monday, November 07, 2011 9:16 AM
Subject: Re: [emax] Rs422.. again
Do you know if they fit the 8100? That is what I always understood to be the last PPC nubus Mac.
http://lowendmac.com/ppc/power-macintosh-8100.html
The cards are indeed massive.
Op 7 nov. 2011, om 10:13 heeft jack het volgende geschreven:
> no its my bad its the 9500 quadra that has the nubus slots
>
> thats the last big mac with nubus slots and works with the audiomedia 1/2 and soundtools
>
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2011-11-07 by Louis van Dompselaar
No, haven't been able to find one, nor any other usable nubus Mac for that matter. And I don't want to offer much as I'm not sure the Audiomedia card I have is actually functional. I've tried asking for one on second hand (Mac) websites in the past but people usually don't understand the nubus requirement and you get inundated with offers of any old Mac that is out there... Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven: > looks good has nubus slots and will work on system 7 faster processor 80-100mhz > > than the 9500 > > its in the same case as the quadra > > but can you get 1 thats the question as they are like rocking horse pooh like most of the quadra range > > as i wanted to up grade my path to the quadra but never been able to get 1 [Non-text portions of this message have been removed]
2011-11-07 by jack
easiest 1 that come up is the mac se30 these work great have 1 pds slot need a pds to nubus adapter and they come with a monitor and everything needed if your going to use just the software version just for emax than you dont need a audiomedia card just the rs442 cable and the software its on the list and i have it at my hosting account same for the e2 which had a specific software version
----- Original Message -----
From: Louis van Dompselaar
To: emax@yahoogroups.com
Sent: Monday, November 07, 2011 10:06 AM
Subject: Re: [emax] Rs422.. again
No, haven't been able to find one, nor any other usable nubus Mac for that matter. And I don't want to offer much as I'm not sure the Audiomedia card I have is actually functional.
I've tried asking for one on second hand (Mac) websites in the past but people usually don't understand the nubus requirement and you get inundated with offers of any old Mac that is out there...
Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven:
> looks good has nubus slots and will work on system 7 faster processor 80-100mhz
>
> than the 9500
>
> its in the same case as the quadra
>
> but can you get 1 thats the question as they are like rocking horse pooh like most of the quadra range
>
> as i wanted to up grade my path to the quadra but never been able to get 1
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2011-11-07 by Francis Cote
Jack, actually the model you are referring to is a Quadra 950. Big machine. The 4 digit numbers came with the PowerPc machines. I used to work at an Apple Certified store right after they had put the PowerPC on the market. I stopped during the Beige G3 generation. I had planned to use Alchemy, since I don't have an Audiomedia. But, if I could find Sound Designer II, I would be willing to get that sound card. I've seen sound designer files on the list, are they usable versions? On Mon, Nov 7, 2011 at 6:11 AM, jack <jammie.emma@...> wrote: > ** > > > easiest 1 that come up is the mac se30 these work great have 1 pds slot > need a pds to nubus adapter and they come with a monitor and everything > needed > > if your going to use just the software version just for emax than you dont > need a audiomedia card just the rs442 cable and the software its on the > list and i have it at my hosting account same for the e2 which had a > specific software version > ----- Original Message ----- > From: Louis van Dompselaar > To: emax@yahoogroups.com > Sent: Monday, November 07, 2011 10:06 AM > Subject: Re: [emax] Rs422.. again > > No, haven't been able to find one, nor any other usable nubus Mac for that > matter. And I don't want to offer much as I'm not sure the Audiomedia card > I have is actually functional. > > I've tried asking for one on second hand (Mac) websites in the past but > people usually don't understand the nubus requirement and you get inundated > with offers of any old Mac that is out there... > > Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven: > > > looks good has nubus slots and will work on system 7 faster processor > 80-100mhz > > > > than the 9500 > > > > its in the same case as the quadra > > > > but can you get 1 thats the question as they are like rocking horse pooh > like most of the quadra range > > > > as i wanted to up grade my path to the quadra but never been able to get > 1 > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]
2011-11-07 by jack
i have usable versions that work with any sampler when it went to version 2.5 it stopped support for hardware samplers dont know why as samplers were still being made then for the emax tthe sounddesigner2 software for that machine is in the files section its a hd image file and it works ----- Original Message -----
From: "Francis Cote" <francis.cote@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 2:08 PM Subject: Re: [emax] Rs422.. again > Jack, actually the model you are referring to is a Quadra 950. Big > machine. > The 4 digit numbers came with the PowerPc machines. I used to work at an > Apple Certified store right after they had put the PowerPC on the market. > I > stopped during the Beige G3 generation. > > I had planned to use Alchemy, since I don't have an Audiomedia. But, if I > could find Sound Designer II, I would be willing to get that sound card. > > I've seen sound designer files on the list, are they usable versions? > > > > On Mon, Nov 7, 2011 at 6:11 AM, jack <jammie.emma@...> wrote: > >> ** >> >> >> easiest 1 that come up is the mac se30 these work great have 1 pds slot >> need a pds to nubus adapter and they come with a monitor and everything >> needed >> >> if your going to use just the software version just for emax than you >> dont >> need a audiomedia card just the rs442 cable and the software its on the >> list and i have it at my hosting account same for the e2 which had a >> specific software version >> ----- Original Message ----- >> From: Louis van Dompselaar >> To: emax@yahoogroups.com >> Sent: Monday, November 07, 2011 10:06 AM >> Subject: Re: [emax] Rs422.. again >> >> No, haven't been able to find one, nor any other usable nubus Mac for >> that >> matter. And I don't want to offer much as I'm not sure the Audiomedia >> card >> I have is actually functional. >> >> I've tried asking for one on second hand (Mac) websites in the past but >> people usually don't understand the nubus requirement and you get >> inundated >> with offers of any old Mac that is out there... >> >> Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven: >> >> > looks good has nubus slots and will work on system 7 faster processor >> 80-100mhz >> > >> > than the 9500 >> > >> > its in the same case as the quadra >> > >> > but can you get 1 thats the question as they are like rocking horse >> > pooh >> like most of the quadra range >> > >> > as i wanted to up grade my path to the quadra but never been able to >> > get >> 1 >> >> [Non-text portions of this message have been removed] >> >> [Non-text portions of this message have been removed] >> >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-07 by Francis Cote
Cool! Sampler support is software related, not hardware related. I don't think it has to do with the fact that you have a Nubus or PCI Audiomedia card. But, all in all, I still don't know if a 9600 will function with the sampler. Might as well try to find a Mac IIci or a Quadra. On Mon, Nov 7, 2011 at 9:26 AM, jack <jammie.emma@...> wrote: > ** > > > i have usable versions that work with any sampler when it went to version > 2.5 it stopped support for hardware samplers dont know why as samplers > were > still being made then > > for the emax tthe sounddesigner2 software for that machine is in the files > section its a hd image file and it works > > ----- Original Message ----- > From: "Francis Cote" <francis.cote@...m> > To: <emax@yahoogroups.com> > Sent: Monday, November 07, 2011 2:08 PM > Subject: Re: [emax] Rs422.. again > > > Jack, actually the model you are referring to is a Quadra 950. Big > > machine. > > The 4 digit numbers came with the PowerPc machines. I used to work at an > > Apple Certified store right after they had put the PowerPC on the > market. > > I > > stopped during the Beige G3 generation. > > > > I had planned to use Alchemy, since I don't have an Audiomedia. But, if I > > could find Sound Designer II, I would be willing to get that sound card. > > > > I've seen sound designer files on the list, are they usable versions? > > > > > > > > On Mon, Nov 7, 2011 at 6:11 AM, jack <jammie.emma@...> > wrote: > > > >> ** > > >> > >> > >> easiest 1 that come up is the mac se30 these work great have 1 pds slot > >> need a pds to nubus adapter and they come with a monitor and everything > >> needed > >> > >> if your going to use just the software version just for emax than you > >> dont > >> need a audiomedia card just the rs442 cable and the software its on the > >> list and i have it at my hosting account same for the e2 which had a > >> specific software version > >> ----- Original Message ----- > >> From: Louis van Dompselaar > >> To: emax@yahoogroups.com > >> Sent: Monday, November 07, 2011 10:06 AM > >> Subject: Re: [emax] Rs422.. again > >> > >> No, haven't been able to find one, nor any other usable nubus Mac for > >> that > >> matter. And I don't want to offer much as I'm not sure the Audiomedia > >> card > >> I have is actually functional. > >> > >> I've tried asking for one on second hand (Mac) websites in the past but > >> people usually don't understand the nubus requirement and you get > >> inundated > >> with offers of any old Mac that is out there... > >> > >> Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven: > >> > >> > looks good has nubus slots and will work on system 7 faster processor > >> 80-100mhz > >> > > >> > than the 9500 > >> > > >> > its in the same case as the quadra > >> > > >> > but can you get 1 thats the question as they are like rocking horse > >> > pooh > >> like most of the quadra range > >> > > >> > as i wanted to up grade my path to the quadra but never been able to > >> > get > >> 1 > >> > >> [Non-text portions of this message have been removed] > >> > >> [Non-text portions of this message have been removed] > >> > >> > >> > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > > Emax and Emax II User's Group Website > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > [Non-text portions of this message have been removed]
2011-11-07 by Louis van Dompselaar
> Sampler support is software related, not hardware related. I don't think it > has to do with the fact that you have a Nubus or PCI Audiomedia card. It does in so far that Sound Designer II uses the Audiomedia card as a dongle and won't run with it. > But, all in all, I still don't know if a 9600 will function with the > sampler. Might as well try to find a Mac IIci or a Quadra. If you use software that only requires RS422 then yes, it will work. The 9600 has two RS422 ports.
2011-11-07 by Francis Cote
So, you mean to say is that the software will specifically check for a Nubus only card and If you have a PCI Audiomedia III card, it won't work. Right? On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar <louis@dompselaar.org>wrote: > ** > > > > > Sampler support is software related, not hardware related. I don't think > it > > has to do with the fact that you have a Nubus or PCI Audiomedia card. > > It does in so far that Sound Designer II uses the Audiomedia card as a > dongle and won't run with it. > > > > But, all in all, I still don't know if a 9600 will function with the > > sampler. Might as well try to find a Mac IIci or a Quadra. > > If you use software that only requires RS422 then yes, it will work. The > 9600 has two RS422 ports. > > > [Non-text portions of this message have been removed]
2011-11-07 by Louis van Dompselaar
I don't know about the Audiomedia III. I've only ever heard the AM II mentioned in combination with SD II. So it might not specically check for nubus, it might just be that it doesn't work with the III at all. I don't know. Others might know more about this. Op 7 nov. 2011, om 16:17 heeft Francis Cote het volgende geschreven:
> So, you mean to say is that the software will specifically check for a > Nubus only card and If you have a PCI Audiomedia III card, it won't work. > > Right?
2011-11-07 by jack
not if you are using just the emax version if you want multipul sampler support then you need a nubus mac with audiomedia 1 /2 or soundtools hardware soundcard pci is a no go as the software version for the audiomedia 3 card only works with lowest os version 2.5 and that has no support for hardware samplers ----- Original Message -----
From: "Francis Cote" <francis.cote@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 2:44 PM Subject: Re: [emax] Rs422.. again > Cool! > > Sampler support is software related, not hardware related. I don't think > it > has to do with the fact that you have a Nubus or PCI Audiomedia card. > > But, all in all, I still don't know if a 9600 will function with the > sampler. Might as well try to find a Mac IIci or a Quadra. > > > > On Mon, Nov 7, 2011 at 9:26 AM, jack <jammie.emma@...> wrote: > >> ** >> >> >> i have usable versions that work with any sampler when it went to version >> 2.5 it stopped support for hardware samplers dont know why as samplers >> were >> still being made then >> >> for the emax tthe sounddesigner2 software for that machine is in the >> files >> section its a hd image file and it works >> >> ----- Original Message ----- >> From: "Francis Cote" <francis.cote@...> >> To: <emax@yahoogroups.com> >> Sent: Monday, November 07, 2011 2:08 PM >> Subject: Re: [emax] Rs422.. again >> >> > Jack, actually the model you are referring to is a Quadra 950. Big >> > machine. >> > The 4 digit numbers came with the PowerPc machines. I used to work at >> > an >> > Apple Certified store right after they had put the PowerPC on the >> market. >> > I >> > stopped during the Beige G3 generation. >> > >> > I had planned to use Alchemy, since I don't have an Audiomedia. But, if >> > I >> > could find Sound Designer II, I would be willing to get that sound >> > card. >> > >> > I've seen sound designer files on the list, are they usable versions? >> > >> > >> > >> > On Mon, Nov 7, 2011 at 6:11 AM, jack <jammie.emma@...> >> wrote: >> > >> >> ** >> >> >> >> >> >> >> easiest 1 that come up is the mac se30 these work great have 1 pds >> >> slot >> >> need a pds to nubus adapter and they come with a monitor and >> >> everything >> >> needed >> >> >> >> if your going to use just the software version just for emax than you >> >> dont >> >> need a audiomedia card just the rs442 cable and the software its on >> >> the >> >> list and i have it at my hosting account same for the e2 which had a >> >> specific software version >> >> ----- Original Message ----- >> >> From: Louis van Dompselaar >> >> To: emax@yahoogroups.com >> >> Sent: Monday, November 07, 2011 10:06 AM >> >> Subject: Re: [emax] Rs422.. again >> >> >> >> No, haven't been able to find one, nor any other usable nubus Mac for >> >> that >> >> matter. And I don't want to offer much as I'm not sure the Audiomedia >> >> card >> >> I have is actually functional. >> >> >> >> I've tried asking for one on second hand (Mac) websites in the past >> >> but >> >> people usually don't understand the nubus requirement and you get >> >> inundated >> >> with offers of any old Mac that is out there... >> >> >> >> Op 7 nov. 2011, om 10:23 heeft jack het volgende geschreven: >> >> >> >> > looks good has nubus slots and will work on system 7 faster >> >> > processor >> >> 80-100mhz >> >> > >> >> > than the 9500 >> >> > >> >> > its in the same case as the quadra >> >> > >> >> > but can you get 1 thats the question as they are like rocking horse >> >> > pooh >> >> like most of the quadra range >> >> > >> >> > as i wanted to up grade my path to the quadra but never been able to >> >> > get >> >> 1 >> >> >> >> [Non-text portions of this message have been removed] >> >> >> >> [Non-text portions of this message have been removed] >> >> >> >> >> >> >> > >> > >> > [Non-text portions of this message have been removed] >> > >> > >> > >> > ------------------------------------ >> >> > >> > Emax and Emax II User's Group Website >> > >> > http://www.silveriafamily.comYahoo! Groups Links >> > >> > >> > >> >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-07 by jack
sound designer 2 has various versions that work with various machines some nead the audio card as that is the dongle but the 9600 is a pci machine and even tho it has rs422 ports i dont know if the sound designer 2 emax only version will work with the os thats on the 9600 be it os9 becuase if i remember correct the reason that the audiomedia3 did not do thwe full sampler support was due to the os and not to the hardware something changed in the os that made the midi sample transfer not work on the later machines so they did not write a new coded version for the newer os now if you have a os7 compatible mac and you get the image for sounddesigner2 for emax then you dont need the hardware card as dongle but it will only work with emax no other samplers are catered for esynthesis can you con firm this for me as you know as much as me about this working now if you dont want to bother looking for a mac to use with this software then you can use emxp and the newer tiny rs422 interface card then you can use from a pc that is the only other way as i use both the emax e3 and emulator2 i use the software still as its the easiest way to make patches as you can edit all params envelope settings and modulation and you make a bank up of presets and then dump them ----- Original Message -----
From: "Francis Cote" <francis.cote@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 3:17 PM Subject: Re: [emax] Rs422.. again > So, you mean to say is that the software will specifically check for a > Nubus only card and If you have a PCI Audiomedia III card, it won't work. > > Right? > > > On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar > <louis@...>wrote: > >> ** >> >> >> >> > Sampler support is software related, not hardware related. I don't >> > think >> it >> > has to do with the fact that you have a Nubus or PCI Audiomedia card. >> >> It does in so far that Sound Designer II uses the Audiomedia card as a >> dongle and won't run with it. >> >> >> > But, all in all, I still don't know if a 9600 will function with the >> > sampler. Might as well try to find a Mac IIci or a Quadra. >> >> If you use software that only requires RS422 then yes, it will work. The >> 9600 has two RS422 ports. >> >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-07 by Francis Cote
So you are saying that the sound designer 2 image from the list works without a Digidesing card or dongle of some sort, on OS 7.x. Right? If so, then I'll continue my search for Mac II or Quadra. An SE\30 could also be an option. Thanks On Mon, Nov 7, 2011 at 11:34 AM, jack <jammie.emma@blueyonder.co.uk> wrote: > ** > > > sound designer 2 has various versions that work with various machines some > nead the audio card as that is the dongle > > but the 9600 is a pci machine and even tho it has rs422 ports i dont know > if > the sound designer 2 emax only version will work with the os thats on the > 9600 be it os9 > > becuase if i remember correct the reason that the audiomedia3 did not do > thwe full sampler support was due to the os and not to the hardware > something changed in the os that made the midi sample transfer not work on > the later machines so they did not write a new coded version for the newer > os > > now if you have a os7 compatible mac and you get the image for > sounddesigner2 for emax then you dont need the hardware card as dongle but > it will only work with emax > > no other samplers are catered for > > esynthesis can you con firm this for me as you know as much as me about > this > working > > now if you dont want to bother looking for a mac to use with this software > then you can use emxp and the newer tiny rs422 interface card then you can > use from a pc > > that is the only other way > > as i use both the emax e3 and emulator2 i use the software still as its > the > easiest way to make patches as you can edit all params envelope settings > and > modulation and you make a bank up of presets and then dump them > > > ----- Original Message ----- > From: "Francis Cote" <francis.cote@...> > To: <emax@yahoogroups.com> > Sent: Monday, November 07, 2011 3:17 PM > Subject: Re: [emax] Rs422.. again > > > So, you mean to say is that the software will specifically check for a > > Nubus only card and If you have a PCI Audiomedia III card, it won't work. > > > > Right? > > > > > > On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar > > <louis@...>wrote: > > > >> ** > > >> > >> > >> > >> > Sampler support is software related, not hardware related. I don't > >> > think > >> it > >> > has to do with the fact that you have a Nubus or PCI Audiomedia card. > >> > >> It does in so far that Sound Designer II uses the Audiomedia card as a > >> dongle and won't run with it. > >> > >> > >> > But, all in all, I still don't know if a 9600 will function with the > >> > sampler. Might as well try to find a Mac IIci or a Quadra. > >> > >> If you use software that only requires RS422 then yes, it will work. The > >> 9600 has two RS422 ports. > >> > >> > >> > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Emax and Emax II User's Group Website > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > [Non-text portions of this message have been removed]
2011-11-07 by jack
yes just need a mac with os7 pre pci and i would say the cheapest option would be an se\30 and an scsi to ide cf card adapter for the hard drive no noiseas its a monitor and mac all in 1 only need a keyboard and mouse and they have scsi so upgrading hd is easy i use a little tower with seven cf scsi card drives in and i can plug it into my samplers aswell i have several different variations of scsi to ide adapters for different samplers as some work better than others with different makes ----- Original Message -----
From: "Francis Cote" <francis.cote@...> To: <emax@yahoogroups.com> Sent: Monday, November 07, 2011 5:44 PM Subject: Re: [emax] Rs422.. again > So you are saying that the sound designer 2 image from the list works > without a Digidesing card or dongle of some sort, on OS 7.x. Right? > > If so, then I'll continue my search for Mac II or Quadra. An SE\30 could > also be an option. > > Thanks > > > On Mon, Nov 7, 2011 at 11:34 AM, jack <jammie.emma@...> > wrote: > >> ** >> >> >> sound designer 2 has various versions that work with various machines >> some >> nead the audio card as that is the dongle >> >> but the 9600 is a pci machine and even tho it has rs422 ports i dont know >> if >> the sound designer 2 emax only version will work with the os thats on the >> 9600 be it os9 >> >> becuase if i remember correct the reason that the audiomedia3 did not do >> thwe full sampler support was due to the os and not to the hardware >> something changed in the os that made the midi sample transfer not work >> on >> the later machines so they did not write a new coded version for the >> newer >> os >> >> now if you have a os7 compatible mac and you get the image for >> sounddesigner2 for emax then you dont need the hardware card as dongle >> but >> it will only work with emax >> >> no other samplers are catered for >> >> esynthesis can you con firm this for me as you know as much as me about >> this >> working >> >> now if you dont want to bother looking for a mac to use with this >> software >> then you can use emxp and the newer tiny rs422 interface card then you >> can >> use from a pc >> >> that is the only other way >> >> as i use both the emax e3 and emulator2 i use the software still as its >> the >> easiest way to make patches as you can edit all params envelope settings >> and >> modulation and you make a bank up of presets and then dump them >> >> >> ----- Original Message ----- >> From: "Francis Cote" <francis.cote@...> >> To: <emax@yahoogroups.com> >> Sent: Monday, November 07, 2011 3:17 PM >> Subject: Re: [emax] Rs422.. again >> >> > So, you mean to say is that the software will specifically check for a >> > Nubus only card and If you have a PCI Audiomedia III card, it won't >> > work. >> > >> > Right? >> > >> > >> > On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar >> > <louis@...>wrote: >> > >> >> ** >> >> >> >> >> >> >> >> >> > Sampler support is software related, not hardware related. I don't >> >> > think >> >> it >> >> > has to do with the fact that you have a Nubus or PCI Audiomedia >> >> > card. >> >> >> >> It does in so far that Sound Designer II uses the Audiomedia card as a >> >> dongle and won't run with it. >> >> >> >> >> >> > But, all in all, I still don't know if a 9600 will function with the >> >> > sampler. Might as well try to find a Mac IIci or a Quadra. >> >> >> >> If you use software that only requires RS422 then yes, it will work. >> >> The >> >> 9600 has two RS422 ports. >> >> >> >> >> >> >> > >> > >> > [Non-text portions of this message have been removed] >> > >> > >> > >> > ------------------------------------ >> > >> > Emax and Emax II User's Group Website >> > >> > http://www.silveriafamily.comYahoo! Groups Links >> > >> > >> > >> >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > >
2011-11-09 by Francis Cote
I'm getting a Quadra 700, with mouse, keyboard and screen for 20 bucks. Should do! Can I run 7.5.5 or 7.6, or do I have to stick with 7.1? On Mon, Nov 7, 2011 at 12:59 PM, jack <jammie.emma@...> wrote: > ** > > > yes just need a mac with os7 pre pci > > and i would say the cheapest option would be an se\30 and an scsi to ide > cf > card adapter for the hard drive no noiseas its a monitor and mac all in 1 > only need a keyboard and mouse and they have scsi so upgrading hd is easy > i > use a little tower with seven cf scsi card drives in and i can plug it > into > my samplers aswell i have several different variations of scsi to ide > adapters for different samplers as some work better than others with > different makes > > ----- Original Message ----- > From: "Francis Cote" <francis.cote@...> > To: <emax@yahoogroups.com> > Sent: Monday, November 07, 2011 5:44 PM > Subject: Re: [emax] Rs422.. again > > > So you are saying that the sound designer 2 image from the list works > > without a Digidesing card or dongle of some sort, on OS 7.x. Right? > > > > If so, then I'll continue my search for Mac II or Quadra. An SE\30 could > > also be an option. > > > > Thanks > > > > > > On Mon, Nov 7, 2011 at 11:34 AM, jack <jammie.emma@blueyonder.co.uk> > > wrote: > > > >> ** > > >> > >> > >> sound designer 2 has various versions that work with various machines > >> some > >> nead the audio card as that is the dongle > >> > >> but the 9600 is a pci machine and even tho it has rs422 ports i dont > know > >> if > >> the sound designer 2 emax only version will work with the os thats on > the > >> 9600 be it os9 > >> > >> becuase if i remember correct the reason that the audiomedia3 did not do > >> thwe full sampler support was due to the os and not to the hardware > >> something changed in the os that made the midi sample transfer not work > >> on > >> the later machines so they did not write a new coded version for the > >> newer > >> os > >> > >> now if you have a os7 compatible mac and you get the image for > >> sounddesigner2 for emax then you dont need the hardware card as dongle > >> but > >> it will only work with emax > >> > >> no other samplers are catered for > >> > >> esynthesis can you con firm this for me as you know as much as me about > >> this > >> working > >> > >> now if you dont want to bother looking for a mac to use with this > >> software > >> then you can use emxp and the newer tiny rs422 interface card then you > >> can > >> use from a pc > >> > >> that is the only other way > >> > >> as i use both the emax e3 and emulator2 i use the software still as its > >> the > >> easiest way to make patches as you can edit all params envelope settings > >> and > >> modulation and you make a bank up of presets and then dump them > >> > >> > >> ----- Original Message ----- > >> From: "Francis Cote" <francis.cote@...> > >> To: <emax@yahoogroups.com> > >> Sent: Monday, November 07, 2011 3:17 PM > >> Subject: Re: [emax] Rs422.. again > >> > >> > So, you mean to say is that the software will specifically check for a > >> > Nubus only card and If you have a PCI Audiomedia III card, it won't > >> > work. > >> > > >> > Right? > >> > > >> > > >> > On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar > >> > <louis@...g>wrote: > >> > > >> >> ** > >> > >> >> > >> >> > >> >> > >> >> > Sampler support is software related, not hardware related. I don't > >> >> > think > >> >> it > >> >> > has to do with the fact that you have a Nubus or PCI Audiomedia > >> >> > card. > >> >> > >> >> It does in so far that Sound Designer II uses the Audiomedia card as > a > >> >> dongle and won't run with it. > >> >> > >> >> > >> >> > But, all in all, I still don't know if a 9600 will function with > the > >> >> > sampler. Might as well try to find a Mac IIci or a Quadra. > >> >> > >> >> If you use software that only requires RS422 then yes, it will work. > >> >> The > >> >> 9600 has two RS422 ports. > >> >> > >> >> > >> >> > >> > > >> > > >> > [Non-text portions of this message have been removed] > >> > > >> > > >> > > >> > ------------------------------------ > >> > > >> > Emax and Emax II User's Group Website > >> > > >> > http://www.silveriafamily.comYahoo! Groups Links > >> > > >> > > >> > > >> > >> > >> > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Emax and Emax II User's Group Website > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > [Non-text portions of this message have been removed]
2011-11-09 by jack
system 7 what ever version ----- Original Message -----
From: "Francis Cote" <francis.cote@...> To: <emax@yahoogroups.com> Sent: Wednesday, November 09, 2011 1:21 AM Subject: Re: [emax] Rs422.. again > I'm getting a Quadra 700, with mouse, keyboard and screen for 20 bucks. > Should do! > > Can I run 7.5.5 or 7.6, or do I have to stick with 7.1? > > > On Mon, Nov 7, 2011 at 12:59 PM, jack <jammie.emma@...> > wrote: > >> ** >> >> >> yes just need a mac with os7 pre pci >> >> and i would say the cheapest option would be an se\30 and an scsi to ide >> cf >> card adapter for the hard drive no noiseas its a monitor and mac all in 1 >> only need a keyboard and mouse and they have scsi so upgrading hd is easy >> i >> use a little tower with seven cf scsi card drives in and i can plug it >> into >> my samplers aswell i have several different variations of scsi to ide >> adapters for different samplers as some work better than others with >> different makes >> >> ----- Original Message ----- >> From: "Francis Cote" <francis.cote@...> >> To: <emax@yahoogroups.com> >> Sent: Monday, November 07, 2011 5:44 PM >> Subject: Re: [emax] Rs422.. again >> >> > So you are saying that the sound designer 2 image from the list works >> > without a Digidesing card or dongle of some sort, on OS 7.x. Right? >> > >> > If so, then I'll continue my search for Mac II or Quadra. An SE\30 >> > could >> > also be an option. >> > >> > Thanks >> > >> > >> > On Mon, Nov 7, 2011 at 11:34 AM, jack <jammie.emma@...> >> > wrote: >> > >> >> ** >> >> >> >> >> >> >> sound designer 2 has various versions that work with various machines >> >> some >> >> nead the audio card as that is the dongle >> >> >> >> but the 9600 is a pci machine and even tho it has rs422 ports i dont >> know >> >> if >> >> the sound designer 2 emax only version will work with the os thats on >> the >> >> 9600 be it os9 >> >> >> >> becuase if i remember correct the reason that the audiomedia3 did not >> >> do >> >> thwe full sampler support was due to the os and not to the hardware >> >> something changed in the os that made the midi sample transfer not >> >> work >> >> on >> >> the later machines so they did not write a new coded version for the >> >> newer >> >> os >> >> >> >> now if you have a os7 compatible mac and you get the image for >> >> sounddesigner2 for emax then you dont need the hardware card as dongle >> >> but >> >> it will only work with emax >> >> >> >> no other samplers are catered for >> >> >> >> esynthesis can you con firm this for me as you know as much as me >> >> about >> >> this >> >> working >> >> >> >> now if you dont want to bother looking for a mac to use with this >> >> software >> >> then you can use emxp and the newer tiny rs422 interface card then you >> >> can >> >> use from a pc >> >> >> >> that is the only other way >> >> >> >> as i use both the emax e3 and emulator2 i use the software still as >> >> its >> >> the >> >> easiest way to make patches as you can edit all params envelope >> >> settings >> >> and >> >> modulation and you make a bank up of presets and then dump them >> >> >> >> >> >> ----- Original Message ----- >> >> From: "Francis Cote" <francis.cote@...> >> >> To: <emax@yahoogroups.com> >> >> Sent: Monday, November 07, 2011 3:17 PM >> >> Subject: Re: [emax] Rs422.. again >> >> >> >> > So, you mean to say is that the software will specifically check for >> >> > a >> >> > Nubus only card and If you have a PCI Audiomedia III card, it won't >> >> > work. >> >> > >> >> > Right? >> >> > >> >> > >> >> > On Mon, Nov 7, 2011 at 9:49 AM, Louis van Dompselaar >> >> > <louis@...>wrote: >> >> > >> >> >> ** >> >> >> >> >> >> >> >> >> >> >> >> >> >> > Sampler support is software related, not hardware related. I >> >> >> > don't >> >> >> > think >> >> >> it >> >> >> > has to do with the fact that you have a Nubus or PCI Audiomedia >> >> >> > card. >> >> >> >> >> >> It does in so far that Sound Designer II uses the Audiomedia card >> >> >> as >> a >> >> >> dongle and won't run with it. >> >> >> >> >> >> >> >> >> > But, all in all, I still don't know if a 9600 will function with >> the >> >> >> > sampler. Might as well try to find a Mac IIci or a Quadra. >> >> >> >> >> >> If you use software that only requires RS422 then yes, it will >> >> >> work. >> >> >> The >> >> >> 9600 has two RS422 ports. >> >> >> >> >> >> >> >> >> >> >> > >> >> > >> >> > [Non-text portions of this message have been removed] >> >> > >> >> > >> >> > >> >> > ------------------------------------ >> >> > >> >> > Emax and Emax II User's Group Website >> >> > >> >> > http://www.silveriafamily.comYahoo! Groups Links >> >> > >> >> > >> >> > >> >> >> >> >> >> >> > >> > >> > [Non-text portions of this message have been removed] >> > >> > >> > >> > ------------------------------------ >> > >> > Emax and Emax II User's Group Website >> > >> > http://www.silveriafamily.comYahoo! Groups Links >> > >> > >> > >> >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.1869 / Virus Database: 2092/4605 - Release Date: 11/08/11 >