Emax

i was playing around with the M.U.S.T. disk and the filter trims. i followed some of the procedures in the service manual for trims and everything worked. 

does anyone know what the numbers actually mean? the manual isnt very clear on this, and theres little info on the net. 

values are 0-15 on the top row and bottom row, somewhere in the middle are where they settle. but when messing with these, i noticed that you can get a nice overdrive kind of sound if these are at extreme ranges.
also fun to set these alternately high and low

hello. where could i get hold on that must disk ? i need to calibrate vca's. one vca peak ... making a higher output than the other voices.

cheers.

/k



________________________________
 Från: soundsubs <soundsubs@gmail.com>
Till: emax@yahoogroups.com 
Skickat: torsdag, 23 februari 2012 17:34
Ämne: [emax] filter trims?
 

  
i was playing around with the M.U.S.T. disk and the filter trims. i followed some of the procedures in the service manual for trims and everything worked. 

does anyone know what the numbers actually mean? the manual isnt very clear on this, and theres little info on the net. 

values are 0-15 on the top row and bottom row, somewhere in the middle are where they settle. but when messing with these, i noticed that you can get a nice overdrive kind of sound if these are at extreme ranges.
also fun to set these alternately high and low 


 

[Non-text portions of this message have been removed]

its in the files section

but you need to do a recalibrate before using the must disk as the must disk is for checking that tthe recalibration has worked 

  ----- Original Message ----- 
  From: KW 
  To: emax@yahoogroups.com 
  Sent: Thursday, February 23, 2012 5:04 PM
  Subject: SV: [emax] filter trims?


    
  hello. where could i get hold on that must disk ? i need to calibrate vca's. one vca peak ... making a higher output than the other voices.

  cheers.

  /k

  ________________________________
  Från: soundsubs <soundsubs@...>
  Till: emax@yahoogroups.com 
  Skickat: torsdag, 23 februari 2012 17:34
  Ämne: [emax] filter trims?


    
  i was playing around with the M.U.S.T. disk and the filter trims. i followed some of the procedures in the service manual for trims and everything worked. 

  does anyone know what the numbers actually mean? the manual isnt very clear on this, and theres little info on the net. 

  values are 0-15 on the top row and bottom row, somewhere in the middle are where they settle. but when messing with these, i noticed that you can get a nice overdrive kind of sound if these are at extreme ranges.
  also fun to set these alternately high and low 

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]