hi guys thanks for your help here. ok, i'm using the keyboard, first of all. the problem is that, no matter WHERE i set the coarse adjustment(less than 12, more than 12, right on 12 notes per octave) it still will not play a full octave. it's playing more than 12 tones/octave, so the internal calibration is obviously off. it will come close--very close, if i have the coarse all the way counterclockwise and the fine clockwise. the oscillator adjustments don't affect this. there should be, somewhere on board 1, a scale trim pot. if there isn't, i assume i'll have to make the adjustment with a resistor change or something, but i don't have any of the correct info since the schematics for board 1 are different between the serial #s. if you have any more ideas please let me know. thanks, luther --- In emlsynth@y..., "rob80b" <rob80b@y...> wrote: > Excellent point, if Luther can give us more info on his tuning > problem, fellow board members may be able to help. > We are assuming you are using the keyboard and not an > external controller of which I have another fix.
Message
Re: What the original poster doesn't say if he's overshooting or
2002-05-09 by napalmavenger