Eml synthesizers

> My EML 200 is doing something strange. First off, OSC 2 is not
> working. BUT if I turn up the Frequency knob all the way, poof - the
> fuse is blown. Any ideas?

If the wiper of the frequency pot is shorted to ground (or maybe
to the case?), it would short out the power supply when you
turned the pot to max.  Check that the wiper (middle connection)
of thepot isn't touching anything else, check that the wire 
from the wiper contact hasn't come off at the other end.  There
is an electrolytic cap between the wiper and ground - if that 
has gone short, that might do it.  

I'm just working from the schematic.  I don't own a 200.  Got any 
photos of the inside.


Steve