Eml synthesizers

I'd check to see if the CV path from the select switch to the VCO is intact.


  _____  

From: emlsynth@yahoogroups.com [mailto:emlsynth@yahoogroups.com] On Behalf
Of dramirezpa
Sent: Wednesday, December 01, 2010 10:10 AM
To: emlsynth@yahoogroups.com
Subject: [emlsynth] Re: new member - 1010 OSC2 question?


  

Thanks for the response.

Any idea what might be causing it to be operable but in LFO range?

I'll be taking it apart for a thorough cleaning soon and although I'm not up
to snuff in synth circuit design, I have a decent working knowledge of audio
electronics troubleshooting and repair.

--- In emlsynth@yahoogroups.com <mailto:emlsynth%40yahoogroups.com> , Matt
<matt.fretton@...> wrote:
>
> OSC2 is an audio frequency oscilator so it seems your EML 101 is in need
of
> a service. The only VCOs that operate in the LFO range are OSC1 & OSC4
> 
> On 1 December 2010 06:30, dramirezpa <dramirezpa@...> wrote:
> 
> >
> >
> > Hey guys, just found this forum. Also just acquired an eml 101.
> >
> > So OSC2 seems to be making subsonic oscs. Reading the user and service
> > manual it seems like it should be making human-range oscillations like
osc3
> > and 4 are, but instead i am hearing mostly nothing, and sometimes that
> > little "flap" you hear when you are listening to the direct out from the
> > other oscs when you have them set to cm/-1/etc.
> >
> > this is wrong, right? or am i missing something?
> >
> > 
> >
>