Eml synthesizers

It could be of use.
 
You'd just have to figure out how to get +/-15VDC to it.
 
The +/- VDC output out of the 401 is Tip: +15V, Ring: -15V and sleeve is
ground. But,  I have no idea how this box is wired. Other than that, it's
plug and play. 
 
I bought my circuit module from EML in Jan.1979 and paid $45.00 for it. 
 
$450.00 is too high a price. $150.00 might be more like it. Unless, they're
hoping to get some bucks off the "vintage" market.
 
I make a similar module that does the same thing. But, it has a LED to
indicate when the preamp level is reaching a 5V signal level, a LED to
indicate when the gate is active and an inverted envelope output in addition
to the typical envelope output.
 
My entire module is around $200.00 and the assembled/ tested module board is
only around $80.00. 
 
That's comparable to other modules of the same type in the current market.
So, there are options available.


  _____  

From: emlsynth@yahoogroups.com [mailto:emlsynth@yahoogroups.com] On Behalf
Of Prosper Prodaniuk
Sent: Thursday, August 18, 2011 2:53 PM
To: emlsynth@yahoogroups.com
Subject: RE: [emlsynth] Re: How do you use the EML Envelope Follower? (lil
yellow box)


  



So as an EML 100 owner then this box would have no use for me without
modification? It's not just plug and play?