Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Message

Re: pickups

2001-12-03 by Dieter Waechter

No probs.
But if you use factory-preset-patches, you'll will get a clipping, because of the high output from EMGs.
You have to turn the volume-knob (on the guitar) back a little. Or you program your own Patches.
You should not use the rear input, if you want high valve distortion, because the rear input causes a hard feedback, because the coax-cable which runs from the rear-input to the frontside runs beneath the valves...
Dieter
----- Original Message -----
Sent: Saturday, December 01, 2001 2:39 AM
Subject: pickups

any problems with EMG's and the 2101 that you know of

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.