Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Yes, Ebay is your friend when it comes to sexy Blue LCD's.

Changing out the LCD on the 2101 is a little difficult.  The LCD
module on the 2101 is soldered to the front panel PCB.  I think there
was 14 or 16 pins that have to be un-soldered/removed.

 So you have to be clever to remove it safely.  but it's pretty easy
once the old LCD is removed to solder in the new one.
















-- In gsp-2101@yahoogroups.com, "MM" <strategy400@...> wrote:
>
> Check out http://www.crystalfontz.com/
> Or eBay has tons of LCD's cheap.
> Most use Hitachi or Sharp controllers and are interchangeable.
> I just recently replaced the LCD in my Alesis Quadraverb with a salvaged
> LCD from a piece of network gear. Had to install a pot to lower the
> voltage to the backlight LED's though (otherwise it will overheat!)
>  
> -----Original Message-----
> From: gsp-2101@yahoogroups.com [mailto:gsp-2101@yahoogroups.com] On
> Behalf Of metalminstrel1
> Sent: Saturday, February 03, 2007 8:31 AM
> To: gsp-2101@yahoogroups.com
> Subject: [gsp-2101] Re: Digitech GSP 2101 with FootControl and Custom
> Blue LCD
>  
> How did you get the cool blue LCD on your GSP 2101? That is bad ass my
> brutha. 
> --- In gsp-2101@yahoogroups.com, "Brian" <carpediembaby_2000@> wrote:
> >
> > Hello everyone,
> > 
> > My GSP 2101 is looking for a new home:
> > 
> >
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AM
> \
> > ESE%3AIT&viewitem=&item=180078527228&rd=1&rd=1
> >
> <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3A
> \
> > MESE%3AIT&viewitem=&item=180078527228&rd=1&rd=1>
> >
>