Tom:
There are 2 steps to using an expression pedal to
control a program parameter. You have performed only one step - pedal
calibration. The other step is to link the expression pedal to a program
parameter. Here's a copy of MIDIWizard's On-Line Help that describes this
process:
Assigning Control of a New Parameter to
an Expression Pedal
From your programs title screen, use the
[Previous] or [Next] arrow buttons and the function keys [1], [2], or [3] to
select the parameter you wish to link to the expression pedal. Next, press
the [Link] button. At this point, your 2101s LED displays the message
Select a Foot Switch. Move your expression pedal to link it to the
selected parameter. Your 2101s LED confirms the new link.
Press function key [2] and use the DATA wheel to
specify the parameter value corresponding to the full back toe-up pedal
position. Press function key [3] and use the DATA wheel to specify the
parameter value corresponding to the full forward toe-down pedal
position.
The default values are the parameters minimum
and maximum values respectively. If you want to invert the effect of your
expression pedal, set the Min Value greater than the Max Value.
Its usually difficult to know what minimum and
maximum values you should select at this point. After playing with the
expression pedal for a while, youll want to change these settings. The
help topic entitled Changing Minimum and Maximum Foot Switch or Expression
Pedal Settings describes how to do this.
Press the [Link] button to exit the link
menu. Remember to press the [Store] button if you wish to save your
updated program.
Don't expect the expression pedal to control
ANYTHING until you've performed the above process.
----- Original Message -----From: chingwaySent: Wednesday, July 23, 2008 3:01 PMSubject: Re: [gsp-2101] control pedal
I think so I mean I calibrated it according to the manual
On Tue, Jul 22, 2008 at 9:32 PM, Graham Pearson <me@grahampearson.com> wrote:
Tom:Are you linking your pedal to the appropriate wah and pedal steel parameters, using the CC menu?----- Original Message -----From: earldoinkSent: Tuesday, July 22, 2008 8:17 PMSubject: [gsp-2101] control pedalI'm having a problem with my expression pedal it lets me calibrate but
doesn't work with the wa or the pedal steel settings I've done the
resets and still no go any ideas??
tia
Tom