I just tried the hard re
I just did the hard reset, still no sound with the bypass off. Took the cover off & tested the voltage between pins 16 & 32 on the u74 chip. It reads 2.7 vdc so the battery is fine. I also switched the tubes around. The output volumn works fine wneb the bypass is switched on but ofcourse nothing with it off. Also tried pluging my amp cord in all the places in the back. no sound when in the fx return, in the fx send, almost blew out my amp. :-( , very loud. But I loopknow it can't work like that. I have the amp in the mono output, and the instrument in the front jack. Question, what should the externa FX loop be set at , NO SUM, Summed. or Bypass ? I currently have it set om Summed.
Thanks, Charlie
I just did the hard reset, still no sound with the bypass off. Took the cover off & tested the voltage between pins 16 & 32 on the u74 chip. It reads 2.7 vdc so the battery is fine. I also switched the tubes around. The output volumn works fine wneb the bypass is switched on but ofcourse nothing with it off. Also tried pluging my amp cord in all the places in the back. no sound when in the fx return, in the fx send, almost blew out my amp. :-( , very loud. But I loopknow it can't work like that. I have the amp in the mono output, and the instrument in the front jack. Question, what should the externa FX loop be set at , NO SUM, Summed. or Bypass ? I currently have it set om Summed.
Thanks, Charlie
To: gsp-2101@yahoogroups.com
From: strategy400@...
Date: Mon, 16 Jan 2012 12:45:52 -0800
Subject: RE: [gsp-2101] No Effects
From: strategy400@...
Date: Mon, 16 Jan 2012 12:45:52 -0800
Subject: RE: [gsp-2101] No Effects
Normally the bypass is off. Try a reset if you have no data you are concerned about.
To: gsp-2101@yahoogroups.com
From: charliebaba51@...
Date: Mon, 16 Jan 2012 11:34:38 -0500
Subject: RE: [gsp-2101] No Effects
From: charliebaba51@...
Date: Mon, 16 Jan 2012 11:34:38 -0500
Subject: RE: [gsp-2101] No Effects
Must not have been the FX loop settings. I tried all 3, bypass, summed & no sum.
When the gsp is working correctly is the bypass switched on or off ? Currently I here no sound if it is switched off. '
Charlie
When the gsp is working correctly is the bypass switched on or off ? Currently I here no sound if it is switched off. '
Charlie
To: gsp-2101@yahoogroups.com
From: chris.pelayo@...
Date: Sun, 15 Jan 2012 18:20:40 +0000
Subject: Re: [gsp-2101] No Effects [1 Attachment]
From: chris.pelayo@...
Date: Sun, 15 Jan 2012 18:20:40 +0000
Subject: Re: [gsp-2101] No Effects [1 Attachment]
[Attachment(s) from chris.pelayo@... included below] It's probably your effects loop settings.
_
Sent from Chris R. Pelayo's Blackberry
Sent from Chris R. Pelayo's Blackberry
From: "charlie37752"
Sender: gsp-2101@yahoogroups.com
Date: Sun, 15 Jan 2012 18:17:35 -0000
To:
ReplyTo: gsp-2101@yahoogroups.com
Subject: [gsp-2101] No Effects
I have a GSP-2101 Limited Edition. When I bought it (used) it worked fine. However, now I can't get the effects to work. First I couldn't get any sound at all but when I pressed the bypass switch I have sound but no effects. I am using the front input with my guitar and the quarter inch (mono) from the back goung to my amp. If I turn off the bypass again, then no sound. Both tubes work, (atleast they light up). Wondering if anyone knows the problem. Thanks, Charlie