Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

hey dieter waechter, here's my shipping address, write
it down------  andy wilkes,144 burleigh st., holly
hill florida,32117 .i want one of the ppc210's...can i
pay for it online with a credit card, tell me what i
need to do, thanks, andy                              
             
--- Dieter Waechter <smile1973@...> wrote:

> Hello!
> 
> Some have asked me for a PPC210 module for the
> GSP2101 or the TSR24.
> NOW I HAVE IT AVAILABLE IN A VERY SMALL QUANTITY!
> These will be the last PPC210 ever made, because the
> parts for them are
> definitely sold out completely!
> So you can buy one of the last PPC210 modules ever!
> 
> Here is what you can purchase now:
> 
> PPC210 for Digitech GSP2101
> 
> This is a perfect rebuild of the Digitech PPC-210
> Module which isn't
> available from Digitech anymore.
> It's a professional rebuild and comes with 100%
> functional guarantee.
> The Module comes with detailed installation-manual
> in English and also with
> a CD ROM which contains all necessary Software to
> store your settings and
> patches on your PC over MIDI.
> To install the PPC210 Module you need software-
> version 2.00 or higher in
> your GSP2101.
> If you don't know which software- version you've
> got:
> - switch off the GSP2101
> - switch on the GSP2101 while watching the display
> - The Software- Version is shown there while boot up
> - E.g. there is shown: "2.01.01.a."
> - If you have a lower software- version, you have to
> update the software. A
> software- upgrade kit you can get from me also!
> 
> I always recommend to upgrade to Software- Version
> 3.00.00.a.
> With this software you'll get the best out of your
> GSP 2101
> All you need to upgrade it you can buy from me!
> 
> BTW.: the ".a" at the end of the software- version
> describes, if you're
> GSP2101 runs with 20MHz cycle frequency or not.
> If you have a ".a" at the end of the software-
> version the Z80 (the Z80 is
> the main- processor of your 2101) works with 20 MHz.
> If you have no ".a" at the end of the software-
> version the Z80 works with
> 10 MHz only.
> 
> The PPC210 comes with SDISC I Processor.
> The following information is only for the
> professionals:
> I guarantee that the cannon echo will NOT appear
> with this PPC210. I have
> found a special way to avoid it.
> 
> You will get the following benefits by installing
> the PPC210- Module:
> - Create algorithms that use BOTH S-Discs
> simultaneously. This means that
> you can now create some pretty big algorithms using
> more exotic modules than
> with a single S-Disc unit.
> - Switch Seamlessly between single S-Disc programs.
> This allows your
> "Metallica Crunch" program to fade out according to
> your preprogrammed ramp
> times while the 2101 is loading up your "Clean
> Delay" algorithm (because you
> punched it up on your FC-1). The small amount of
> time it takes the 2101 to
> load the second program is covered up with the sound
> of your previous
> program fading out, rather than a sharp drop in
> sound. Furthermore, by
> allowing slow fade and hold times, you can actually
> blend the two sounds
> together for a few seconds to make the transition
> smoother. However, note
> that as soon as the switch is made, your input is no
> longer sent to the
> first program; the sound from that program is merely
> whatever sound was
> still stored in its delay & reverb buffers.
> Note: you cannot switch seamlessly from or to a
> Dual-S-Disc program, because
> they require both S-Discs to operate. However, you
> can have Dual S-Disc
> programs, and still use seamless switching for other
> (single S-disc)
> programs. In other words, you don't have to choose
> between Seamless
> Switching or Dual S-Disc Programs for your entire
> unit; just for your
> individual programs. Just realize that there will be
> a small gap when
> switching to or from Dual S-Disc programs.
> 
> The Upgrade contains:
> - PPC 210- Module
> - detailed installation manual in German and English
> - Patch- CD (500 Patches, Archiving- Software aso.
> for the GSP2101)
> 
> Price:
> The price is: 185EUR. You also can pay in US$.
> 185EUR = US$242
> Shipping: depends to where you live and which
> shipping options you like to
> have.
> Standard world wide shipping is 10EUR = US$13
> I accept Paypal, cash, bank transfer (for other
> methods contact me)
> What I need to know from you:
> - Your actual Software- Version
> - If you still want the PPC210 module
> - Your shipping address.
> 
> Greets
> Dieter (GSP2101 Guru Germany)
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com