homepage under construction!
2001-12-27 by Dieter Waechter
Hi guys! My homepage is online- but there is just a lot to do. Have a short look: http://dieter.6hg.de/ yes, yes I know... everything under construction. Later Dieter
Thread
homepage under construction!
Re: [gsp-2101] homepage under construction!
2001-12-28 by BlueBandit20@aol.com
Hey Dieter:
Your website looks KILLER!!! GREATJOB!!! I only looked at it briefly and it looks like it has a wealth of info on the 2101. Again, GREAT JOB and THANKS!!!
Also I have never checked the voltage on my 2101:
You wrote:
"Hallo Blue Bandit!
Hmmmm.... the first thing I would try is a factory reset (press and hold "1", switch on 2101, release "1", press "up"). Dont forget to bulk dump before doing this.
Have you experienced any other abnormalities?
Then check, if the problem only appears on one Tube- section or on both.
Check the voltage on the optocoupler pin 1 (U37 for V1 and U38 for V2). The voltage is the Gian - control- Voltage. It must be the same in both cases (failure appears or not).
Tell me the results."
What is bulk dumping? I don't have my 2101 hooked up to my computer ... how do i do it? I imagine that "dumping" is saving the settings ..right? I know .. I am not an electronics wizard, but I have dabbled with many electronic components!!! LOL!!
I also downloaded your schematic for the 2101, so I should be able to find U37 and U38. ;The voltages should be what x dc??? Or does it only matter that they are equal?
Thanks for your help and access to your website!!!
BLUE BANDIT #20
Your website looks KILLER!!! GREATJOB!!! I only looked at it briefly and it looks like it has a wealth of info on the 2101. Again, GREAT JOB and THANKS!!!
Also I have never checked the voltage on my 2101:
You wrote:
"Hallo Blue Bandit!
Hmmmm.... the first thing I would try is a factory reset (press and hold "1", switch on 2101, release "1", press "up"). Dont forget to bulk dump before doing this.
Have you experienced any other abnormalities?
Then check, if the problem only appears on one Tube- section or on both.
Check the voltage on the optocoupler pin 1 (U37 for V1 and U38 for V2). The voltage is the Gian - control- Voltage. It must be the same in both cases (failure appears or not).
Tell me the results."
What is bulk dumping? I don't have my 2101 hooked up to my computer ... how do i do it? I imagine that "dumping" is saving the settings ..right? I know .. I am not an electronics wizard, but I have dabbled with many electronic components!!! LOL!!
I also downloaded your schematic for the 2101, so I should be able to find U37 and U38. ;The voltages should be what x dc??? Or does it only matter that they are equal?
Thanks for your help and access to your website!!!
BLUE BANDIT #20
Re: [gsp-2101] homepage under construction!
2001-12-28 by Dieter Waechter
----- Original Message -----From: BlueBandit20@...Sent: Friday, December 28, 2001 2:45 AMSubject: Re: [gsp-2101] homepage under construction!Hey Dieter:
Your website looks KILLER!!! GREATJOB!!! I only looked at it briefly and it looks like it has a wealth of info on the 2101. Again, GREAT JOB and THANKS!!!
Also I have never checked the voltage on my 2101:
You wrote: ;
"Hallo Blue Bandit!
Hmmmm.... the first thing I would try is a factory reset (press and hold "1", switch on 2101, release "1", press "up"). Dont forget to bulk dump before doing this.
Have you experienced any other abnormalities?
Then check, if the problem only appears on one Tube- section or on both.
Check the voltage on the optocoupler pin 1 (U37 for V1 and U38 for V2). The voltage is the Gian - control- Voltage. It must be the same in both cases (failure appears or not).
Tell me the results."
What is bulk dumping? I don't have my 2101 hooked up to my computer ... how do i do it? I imagine that "dumping" is saving the settings ..right? I know .. I am not an electronics wizard, but I have dabbled with many electronic components!!! LOL!!
... have you got MIDI IN an MIDI OUT on your soundcard?.... have you got a Gameport on your Soundcard?... does the Gameport have a MPU- connection?... does your soundcart support MIDI?... which soundcard have you got?... have you got a MIDI-box?
I also downloaded your schematic for the 2101, so I should be able to find U37 and U38. The voltages should be what x dc??? Or does it only matter that they are equal?... they should be equal... if they are not, then the failure lies in the digital- section. If they are.. the failure lies in the analog- section.
Thanks for your help and access to your website!!!
BLUE BANDIT #20
To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.