Parameter change MIDI message
2010-08-09 by Steven Vachon
Will the GSP2101 transmit a "control change" MIDI message when changing parameters via the foot controller? Parameters like distortion types or gain values.
Thread
Parameter change MIDI message
Parameter change MIDI message
2010-08-09 by Filip Wyrwa
As far as I remember, the unit does not send Control Change messages, only Program Change, but I cannot check it now to be perfectly sure...
Re: Parameter change MIDI message
2010-08-10 by Steven Vachon
Thanks.
By the way, do you work at WOBO? Those guys never responded to my email.
I have a couple questions:
- How many program numbers can be programmed into the WOBO's inputs? I need about 10 GSP-2101 programs to make use of my overdrive pedal, and 10 that don't
- And, what does "Control Change messages are set: 71-74 for loops 1-4." mean?
Thanks again
>
>; As far as I remember, the unit does not send Control Change messages,
> only Program Change, but I cannot check it now to be perfectly sure...
>
Re: [gsp-2101] Re: Parameter change MIDI message
2010-08-10 by Filip Wyrwa
Yes, I'm WOBO co-owner. I'm sorry if I missed your e-mail, but this is holiday time and nothing works as it should, including e-mail blocking software.
ad.1 You may store up to 128 programs in WOBO MIDI Looper on a single MIDI Channel. The unit works in the way that you send Program Change message to it; the number that unit received is displayed on the LED display and you may set the state of every loop for this particular PC message. This is automatically stored in the unit's memory.
ad.2 MIDI Looper4's loops can be controlled individually using Control Change messages, but only four of them - 71 for loop no.1, 72 for loop no.2, etc. 0 value sets particular loop to off while 127 sets particular loop to on.
Cheers,
Filip
ad.1 You may store up to 128 programs in WOBO MIDI Looper on a single MIDI Channel. The unit works in the way that you send Program Change message to it; the number that unit received is displayed on the LED display and you may set the state of every loop for this particular PC message. This is automatically stored in the unit's memory.
ad.2 MIDI Looper4's loops can be controlled individually using Control Change messages, but only four of them - 71 for loop no.1, 72 for loop no.2, etc. 0 value sets particular loop to off while 127 sets particular loop to on.
Cheers,
Filip
Show quoted textHide quoted text
2010/8/10 Steven Vachon <prometh@gmail.com>
Thanks.By the way, do you work at WOBO? Those guys never responded to my email.I have a couple questions:
- How many program numbers can be programmed into the WOBO's inputs? I need about 10 GSP-2101 programs to make use of my overdrive pedal, and 10 that don't
- And, what does "Control Change messages are set: 71-74 for loops 1-4." mean?
Thanks again--- In gsp-2101@yahoogroups.com, Filip Wyrwa wrote:
>
> As far as I remember, the unit does not send Control Change messages,
> only Program Change, but I cannot check it now to be perfectly sure...
>
Re: Parameter change MIDI message
2010-08-11 by Steven Vachon
Cool, and no prob. Thanks for the reply I think I'm going to get a WOBO sometime soon; gotta find $250, heh. How much would shipping cost to Canada? --- In gsp-2101@yahoogroups.com, Filip Wyrwa <goddardfil@...> wrote:
Show quoted textHide quoted text
> > Yes, I'm WOBO co-owner. I'm sorry if I missed your e-mail, but this is > holiday time and nothing works as it should, including e-mail blocking > software. > > ad.1 You may store up to 128 programs in WOBO MIDI Looper on a single MIDI > Channel. The unit works in the way that you send Program Change message to > it; the number that unit received is displayed on the LED display and you > may set the state of every loop for this particular PC message. This is > automatically stored in the unit's memory. > > ad.2 MIDI Looper4's loops can be controlled individually using Control > Change messages, but only four of them - 71 for loop no.1, 72 for loop no.2, > etc. 0 value sets particular loop to off while 127 sets particular loop to > on. > > Cheers, > Filip > > 2010/8/10 Steven Vachon <prometh@...> > > > > > > > Thanks. > > > > By the way, do you work at WOBO? Those guys never responded to my email. > > > > *I have a couple questions:* > > > > 1. How many program numbers can be programmed into the WOBO's inputs? I > > need about 10 GSP-2101 programs to make use of my overdrive pedal, and 10 > > that don't > > 2. And, what does "Control Change messages are set: 71-74 for loops > > 1-4." mean? > > > > > > Thanks again > > > > > > --- In gsp-2101@yahoogroups.com, Filip Wyrwa <goddardfil@> wrote: > > > > > > As far as I remember, the unit does not send Control Change messages, > > > only Program Change, but I cannot check it now to be perfectly sure... > > > > > > > >
Re: [gsp-2101] Re: Parameter change MIDI message
2010-08-11 by Filip Wyrwa
Please contact me directly at distribution@.... Shipping will be free...
Show quoted textHide quoted text
2010/8/11 Steven Vachon <prometh@...>
Cool, and no prob. Thanks for the reply
I think I'm going to get a WOBO sometime soon; gotta find $250, heh. How much would shipping cost to Canada?> Yes, I'm WOBO co-owner. I'm sorry if I missed your e-mail, but this is> 2010/8/10 Steven Vachon <prometh@...>
> holiday time and nothing works as it should, including e-mail blocking
> software.
>
>; ad.1 You may store up to 128 programs in WOBO MIDI Looper on a single MIDI
> Channel. The unit works in the way that you send Program Change message to
> it; the number that unit received is displayed on the LED display and you
> may set the state of every loop for this particular PC message. This is
> automatically stored in the unit's memory.
>
> ad.2 MIDI Looper4's loops can be controlled individually using Control
> Change messages, but only four of them - 71 for loop no.1, 72 for loop no.2,
> etc. 0 value sets particular loop to off while 127 sets particular loop to
> on.
>
>; Cheers,
> Filip
>>; > *I have a couple questions:*
>
> >
> >
> > Thanks.
> >
> > By the way, do you work at WOBO? Those guys never responded to my email.
> >
> >
> > 1. How many program numbers can be programmed into the WOBO's inputs? I> > 2. And, what does "Control Change messages are set: 71-74 for loops
> > need about 10 GSP-2101 programs to make use of my overdrive pedal, and 10
> > that don't
> > 1-4." mean?
> >
> >
> > Thanks again
> >
> >
> > --- In gsp-2101@yahoogroups.com, Filip Wyrwa wrote:
> > >
> > > As far as I remember, the unit does not send Control Change messages,
> > > only Program Change, but I cannot check it now to be perfectly sure...
> > >
> >
> >
>