How to Adjust the volume
2012-04-26 by Rickenbacker
I am a newbie too the 2101 without a manual, one thing i notice is some programs are much louder then others. How do i adjust the volume on a program and save it.. Thanks Rick
Thread
How to Adjust the volume
Re: How to Adjust the volume
2012-04-26 by Chris Mead
Rich,
Each program has a master volume. Set it so you have gain unity using the bypass switch. Check your email for the manuals.
~Chris
Re: How to Adjust the volume
2012-04-26 by Rickenbacker
Thanks for the manuals Chris, i have alot of reading material now, i probably wont go to deep into this unit for now, but would like to try my own program someday, just to see if i can do it, there are many good programs on here, and others may just need to be tweaked a bit.. At this moment its a bit overwhelming, but it will be great too use and record with.. I have heard for many years from users how good the 2101 is, didnt think i would ever get one,so far i like what i am hearing.. thanks again for your help. --- In gsp-2101@yahoogroups.com, Chris Mead <stratburst@...> wrote:
Show quoted textHide quoted text
> > Rich, > Each program has a master volume. Set it so you have gain unity using the bypass switch. Check your email for the manuals. > ~Chris >
Re: [gsp-2101] How to Adjust the volume
2012-04-26 by chris.pelayo@sbcglobal.net
Yeah while the 2101 is a massively powerful machine it does seem that something as basic as a preset level parameter was not built in. No worries though you'll just need to use the master distortion level. It's right before the digital section as you scroll right through the program parameters.
I've also attached the manual.
Cheers!
I've also attached the manual.
Cheers!
_
Sent from Chris R. Pelayo's Blackberry
Sent from Chris R. Pelayo's Blackberry
From: "Rickenbacker" <richard.johnson@kos.net>
Sender: gsp-2101@yahoogroups.com
Date: Thu, 26 Apr 2012 01:21:57 -0000
To: <gsp-2101@yahoogroups.com>
ReplyTo: gsp-2101@yahoogroups.com
Subject: [gsp-2101] How to Adjust the volume
I am a newbie too the 2101 without a manual, one thing i notice is some programs are much louder then others.
How do i adjust the volume on a program and save it.. Thanks Rick
Re: [gsp-2101] How to Adjust the volume
2012-04-26 by Rick johnson
HI
I did that today, went through each program to
100, and set them to 0 db.. from there i can decide what to set them too, too
bad Digitech would not just have them all set at 0 db, but according to the
manual, they feel that your going to change them anyways and depending on what
guitar you have and pickups everybody may want a different
setting..
I also switch the digitech too Mono as i only
have one cord hooked up,I am still wondering the best way to hook up this gear i
have..I just do playing here at home and record some.Thanks for the manual,
Rick
Show quoted textHide quoted text
----- Original Message -----From: chris.pelayo@...Sent: Thursday, April 26, 2012 11:22 AMSubject: Re: [gsp-2101] How to Adjust the volumeYeah while the 2101 is a massively powerful machine it does seem that something as basic as a preset level parameter was not built in. No worries though you'll just need to use the master distortion level. It's right before the digital section as you scroll right through the program parameters.
I've also attached the manual.
Cheers!
_
Sent from Chris R. Pelayo's BlackberryFrom: "Rickenbacker"Sender: gsp-2101@yahoogroups.comDate: Thu, 26 Apr 2012 01:21:57 -0000To:ReplyTo: gsp-2101@yahoogroups.comSubject: [gsp-2101] How to Adjust the volumeI am a newbie too the 2101 without a manual, one thing i notice is some programs are much louder then others.
How do i adjust the volume on a program and save it.. Thanks Rick