Yes. I have gone through that part of the manual so many times looking for something I missed.
I have been through the instruction for the Kfuenf software which suggested I need to be in the int/ext display for downloads to work and that didn’t help.
I have a feeling there was something else I have to do but remembering something from 25 years ago is a stretch.
Iain.
Sent from my iPhoneIain,
Although I haven’t owned or used a K5 or K5m in 20 years, I downloaded the manual and read the chapter about dumping/loading data through Midi.
Just checking,
Have you connected both Midi in and out of the K5 to your source ? The K5/K5m needs a so called hand-shake process for recieving Blocks of patches.
I appreciate all the feedback I am getting but am I missing something really simple.
To transfer sounds to a K5 what do you need to do other than go into the Midi section and set the following:
TRS=1 , RCV=1
OMNI=ON
TRS=ON, RCV=ON
PGM=MULTI
Do I have to be in a specific screen to receive the sounds, is their anything else no matter how obvious that I am not doing??
Thanks
Iain.
______________________________________________________________________________________________________________________________________________
E-MAILS are susceptible to interference. You should not assume that the contents originated from the sender or Diodes Incorporated or that they have been accurately reproduced from their original form.
Diodes Incorporated accepts no responsibility for information, errors or omissions in this e-mail nor for its use or misuse nor for any act committed or omitted in connection with this communication.
If in doubt, please verify the authenticity with the sender.
*** Please consider the environmental impact before printing this email ***
*** Ask yourself, "Do I really need a hard copy?"<119042321290400341.png>
Message
Re: [k5synth] K5 sound transfer
2019-04-23 by Antoine Deschênes
It should work with both PROTECT (menu and physical switches) set to OFF. MIDIOX and sysex or MIDI files should work I believe