K5synth

Hi Mariano,

The way to do this is as follows:

1. Set your program setting to Single,

2. Edit a multi.

3. Set your instruments to different midi channels.

4. Press D (WINDOW 4)

5. Set PGM to ON for each channel that you want to send patch changes to.

6. Press A (WINDOW 1)

7. Set MODE to MIDI or MIX for each channel you want to receive patch
changes

8. Press WRITE and save your Multi by answering YES with the Increment dial
to both questions.

Now you should have a Multi that will respond to patch changes internally
instead of changing the Multi.

Joel




----- Original Message -----
From: "capezzani" <capezzani@...>
To: <k5synth@yahoogroups.com>
Sent: Tuesday, February 03, 2004 12:19 PM
Subject: [k5synth] Changing single patches within a multi from the sequencer


> Hello all,
>
> I've read from previous posts that there is a way to change the
> assignment of single patches within a multi, via the sequencer. I
> tried setting the PGM mode to single, and changing the patch number
> from the sequencer, no success. If PGM is set to multi, then the
> whole multi patch changes (actually losing any changes you had
> manually made to the multi :( )
>
> Has any one done this who could shed some light?
> Regards,
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
>  http://groups.yahoo.com/group/k5synth/
>
> To unsubscribe from this group, send an email to:
>  k5synth-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
>  http://docs.yahoo.com/info/terms/
>
>