Remove the brown cap over the buttons with the words on it(push it up or down looking from top by the sides), there's a white moving part that holds the button into a gray part, which isn't removable except by unsoldering it. The white part is clipped into the gray one, use small screwdrivers, or use pliers but DON'T TWIST IT, the button might get unusable after if you do this. --- Marvin Kaye <marv@...> a \ufffdcrit : > > > Hi folks, > > I'm in the process of putting my studio back > together and am using my > K5 as a master controller. I've got a new backlight > on order (the > inverter is ok) so that little item is taken care > of. I do have some > buttons that don't always work on the first push and > I thought I > would follow the directions I found on the > kfuenf.com site to clean > them up, but my buttons don't seem to follow the > same rules as those > outlined in the tech area on kfuenf.com. The > individual switches are > little cubic thingies, about 1/4" on a side, and the > button head (the > part you push on) mounts onto slots on either side > of the switch > actuator with a couple plastic tabs. With the > button removed from > the switch I can see no apparent way to get into the > switch itself to > clean the contacts. The switch actuator is captured > by the switch > body and it doesn't appear to be a user servicable > part. Have any of > you run into this same problem with the switch type > described, and if > so, how did you deal with it? I would imagine I > should be able to > squirt some electronics contact cleaner down around > the edge of the > actuator but I don't want to make matters worse > instead of better. > Perhaps I'm missing something here, but I don't > think so. Any > suggestions would be greatly appreciated. Thanks in > advance.... > > <Marv> > > > > > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > Listen to Internet Radio! Access to your favorite > Artists! > Click to listen to LAUNCHcast now! > http://us.click.yahoo.com/PXvbED/GARHAA/n1hLAA/QnLolB/TM > --------------------------------------------------------------------~-> > > > > Yahoo! Groups Links > > > k5synth-unsubscribe@yahoogroups.com > > > > > > ===== Antoine Desch\ufffdnes, antdes45@... __________________________________________________________ L\ufffdche-vitrine ou l\ufffdche-\ufffdcran ? magasinage.yahoo.ca
Message
Re: [k5synth] intransigent K5 buttons
2004-12-21 by Antoine DeschĂȘnes
Attachments
- No local attachments were found for this message.