Korg Mono/Poly

Hey Florian. Thanks for the info.
Jeppe

> Hi Jeppe
>
>
> I am not sure, whether I answered you personally or not. So once again
> to the list: This should be a faulty IC7 on the VCO board. Originally a
> HD14066BP, but you can take a CD4066B (or even a CD4016B which is pin
> compatible) without any problem.
> If you replace this chip, it might(!) be possible that you have to
> readjust the V/Octave setting
>
> Florian
>
>
>
>> Hello everyone.
>>
>> So, I bought my MP almost a year ago, which resulted in me selling all
>> the other synths I had laying around - they all faded in comparison. It
>> sounds so fraking good!
>>
>> One problem though. My VCO 2 wont stop "portamentoing" before the MP has
>> been turned on for more then an hour. This means I often have to play it
>> with VCO 2 turned alle the way down. And in Poly mode it's quite
>> annoying (even thoughs it is a cool effect with one oscillator sliding
>> after the other in a sloppy fashion when doing chords).
>>
>> When i turn the portamento button all the way down VCO 2 acts like
>> portamento is turned all the way up. When i turn the portamento button
>> up a notch VCO 2 acts like the other VCO's.
>>
>> Do you have any experience with this problem?
>>
>> Oh, and is it possible to repair the microcontroller buttons on the MP?
>> My "hold" buttons is very bad at senseing when i press it.
>>
>> Thanks a lot.
>> Jeppe
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>


-- 
Jeppe Madsen
Tlf. 22395163
Dalgas Boulevard 137 4. TV.
2000 Frederiksberg
Jeppe@fiftyfootspiders.dk