Korg Mono/Poly

Hello  and welcome!

Am 24.07.2015 um 10:17 schrieb jw_dewdney@yahoo.com [korg_mono-poly]:
> I have been rebuiilding a few polysixes and an arp omni so i am a 
> LITTLE bit familiar with the world of analog synthesizers.
:-)

> I was looking for a technical FAQ but was unable to find one. Does one 
> exist for the group? 
There isn't one. But it would be a nice idea to start a thread, that 
contains only postings that contain one question and its answer(s) per 
posting. This thread should not contain any discussions.


In regards of your problem: Alan asked the right question already. The 
key contacts are the most likely cause for the problem. You simply can 
test it by shorting the matrix-contacts on the KLM356, connector 22 (you 
may use a diode for it, but you don't have to).

You may check the VCO outs with a scope (the easiest points are the 
waveform selectro switches). There should be atleast some low frequency 
signal.

Next thing: check whether the switch contacts at the trigger-In socket 
do give contact! Also the polarity switch might be corroded (in this 
case the voice LEDs should be lit when you play, but you won't hear 
anything nevertheless).

Florian