Korg Poly800/EX800 Users

Dave,

you will be happy to know that the code I've written to handle the
joystick does NOT send gazillions of unwanted controller change messages.

Mike.

--- In korgpolyex@yahoogroups.com, "David Mochen" <davidmochen@...> wrote:
>
> Just as we are in it... Mike, surely you must have heard that, even
in idle mode, the Poly 800 MK I will spit out lots of controller
messages (i think it was CC 1 or 2) with zero values that clog up the
MIDI stream real fast. That has always been a big drag.
> Maybe this could be of any help.
> 
> cheers
> 
> dave
> 
>   ----- Original Message ----- 
>   From: jusufzemplin 
>   To: korgpolyex@yahoogroups.com 
>   Sent: Monday, January 21, 2008 6:24 PM
>   Subject: [korgpolyex] Re: Some questions about the sequencer and
MIDI Tx
> 
> 
>   Hi,
> 
>   According Poly 800`s manual (page 108) and my experiences :
>   Poly-800 can transmit and recieve the following kinds of data over 
>   the MIDI bus :
>   ...
>   3. Sequencer clock and Start/Stop control signals
>   ...
> 
>   I have controlled drum machine from Poly`s sequencer. Alesis Hr-16 
>   reacted to pressing Start/Stop, and to tempo change as well. 
>   I havent tried to check MIDI OUT with Ext MIDI clock. But I think in 
>   this case OUT is without MIDI clock data. 
> 
>   I am going to re-connect and try out... lets wait...
> 
>   Jozef
>