Hi Atom, Glad you caught the acid pun. I prefer trance. Batteries never leak trance over PCB's though. A good multimeter will usually give you bad measurements when the current you're measuring is under a millivolt. The resistance in the leads and in the current shunt within the meter will drop the reading. I'll give it a go though. Mike. --- In korgpolyex@yahoogroups.com, Atom Smasher <atom@...> wrote: > > On Wed, 28 May 2008, korgpolyex800 wrote: > > > I will see if I can measure the current but at low current draws the > > meter may not be entirely accurate. I'll give it a go though. > =========== > > a good digital meter should be able to measure in the uA range. > > > > According to the datasheet, if I take CS1 high or CS2 low before the > > power supply drops from 5V to battery 3V, then the current draw will be > > 2uA (typical) up to 100uA (max). But the datasheet seems a bit non > > specific about the timing of the chip select lines being at correct > > levels prior to the supply dropping to 3V. > ============== > > who makes the chips? try calling their tech info number, and you may be > able to reach a product specialist... then you can ask what factors > determine the current draw, and how to decrease it. > > > > Zoinky makes a good point though. The button cell most certainly can be > > replaced by two AA batteries. I like the button cell because it's > > guaranteed not to leak all over the insides of your precious synth's. > =============== > > i've seen coin-cells leak... they just have less "juice" than larger > batteries. > > > > I cringe thinking about the number of Poly's that have been sitting in > > storage with batteries slowly decomposing all of the PCB's. I bought one > > on ebay specifically because the case, joystick etc was in perfect > > condition while the insides were completely acid wrecked. > ================ > > an acid wreched poly800... you make it sound like that's not good ;) > > > > -- > ...atom > > ________________________ > http://atom.smasher.org/ > 762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808 > ------------------------------------------------- > > "We hang the petty thieves and appoint > the great ones to public office." > -- Aesop >
Message
Re: Memory backup going flat on the HAWK-800
2008-05-28 by korgpolyex800
Attachments
- No local attachments were found for this message.