Korg Poly800/EX800 Users

It's strage that you brought this up, as I was looking at the 
Poly800 just the other day and thinking about the exact same 
thing, same meatodolog and all....trippy.

This is exactly how the Kawai k3m is laid out and the Esq-1 is 
similiar too.

I imagine you'd go about it exactly how you put it across, using 
momentary push buttons hacked ito the button key scanning 
circuitry.

It would be some work, a couple of day's, but afterwards it really 
would be a great interface for programming sounds, I know i love 
the interface on the k3m (minus the desire for a rotary encoder).

I'd look into findind some easy to interface tactile switches for the 
operation, ones which you can easily just drill a single cylinder 
hole for, I've looked under the hood of the Poly800, there's is 
plenty of space for mounting switches under the entire patch 
sheet, so that's good to know.

How about this for a slim idea. Adding two analogue trigger 
inputs for the up/down value key. Select the parrameter you wish 
to control, then use an external drum machine (with trigger 
outputs) to trigger the up/down value key, sought of a step 
modulation input. 

That might sound a little kooky, heres another idea that would 
work. Modify the footpedal input at the back (which advances the 
patch #) to accept a trigger input. Then, by saving a a bunch of 
patches with slightly different parrameter settings, you could 
rhymically switch the Poly800 through the different patches with 
an external trigger (from a trigger equipped drum machine ie. 
808 or 606), or, if the drum machine allready sends out 
s-triggers (ie KPR-77), no need to modify the footpedal input, as 
it advances when switched to ground)

Kooky yes, but i was able to do this on my k3m, and better still, 
the Poly 800 doesn't thump when chaning patches on the fly like 
my k3m :)

P9

--- In korgpolyex@y..., Lee Mulvogue <lmulvogue@o...> wrote:
> Seeing as we're talking mods again, I was thinking about the 
following, but I
> think it would be more expensive than what's it's worth...
> 
> Imagine having parameter buttons on the patch sheet, so that 
you could
> basically select things to edit from your "graphical interface" 
instead of
> checking the parameter sheet then going to the keypad - I'm 
thinking have a
> single button for the "primary" key number (ie., filter stuff is 
4something,
> 41, 42 etc., so you'd have a general filter select button hooked 
up to your
> keypad "4"), then a corresponding button for the other digit
> hmm, didn't do a very good job of saying that...  OK.  You want 
to change
> your filter settings, so you hit the filter group button (which 
hooks up to
> your "4"), then you hit a button under the particular filter bit you 
want -
> eg, a button under "cutoff" would hook up to your "1" on the 
keypad.  Osc1
> would have a primary button hooked up to "1", Osc2 would 
have "2", etc.  So
> you'd go "Primary Group, SubMenu" to begin editing the 
particular bit you are
> after...
> 
> Hehe, yeah, I know...  but it would definitely work.  If you had a 
whole heap
> of momentary switches just lying around it would be cool, but 
having to buy
> them wouldn't be worth it.
> 
> Alternately, if you could somehow figure out how to make it so 
each single
> button sent out the right "two digit" signal...
> 
> Hey, it's been a long day.
> LM
> www.baudalign.com