Korg Poly800/EX800 Users

This is how I implemented the mod on my Poly. I hope this helps...

The filter chip is marked "Korg njm2069". In my Poly it's mounted in a socket,
making it very easy to notice. Solder wire leads to pins 5 and 6 (these are
the filter outputs.)

Connect these wires to the opposite terminals of a SPDT switch. Cut C103 from
the poly mainboard and solder it's negative terminal to the common point of
the switch, then solder a wire from it's positive terminal to it's positive
pin position on the board.

Make sure it works, then find a way to mount your switch in the case. 
An interesting expirement is to mount a 100k pot in place of the switch,
one can get some really nice soft pads near the middle, gets really quiet
though.

On Tue, May 13, 2003 at 08:15:53PM -0000, evans_simard wrote:
> Hello.
>  do you mind to provide me the details about the modification..
> 

-- 

"Americans and freedom it happened. (APPLAUSE) We will not resent 
world, and to America. Their prayers. It will come to stop it, 
eliminate of thank your count."
				-- Bush + Travesty Generator