Korg Poly800/EX800 Users

Hi Mike,

I re-flashed the third block of ROM, and the Error 6 has gone away. Who knows how the data got corrupted in the first place! Thanks for the help.

--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Error 6 means there is a difference in the checksum calculation and the checksum value for the third flash ROM.
> 
> This means you have corrupted data in the third flash ROM. Which means you need to reflash the software into the third ROM.
> 
> Error 4 - first block of flash ROM
> Error 5 - second block of flash ROM
> Error 6 - third block of flash ROM.
> 
> 
> Mike
> 
> 
> 
> ________________________________
>  From: snugglepussyisme <snugglepussyisme@...>
> To: korgpolyex@yahoogroups.com 
> Sent: Saturday, July 27, 2013 3:40 PM
> Subject: [korgpolyex] Error 6???
>  
> 
> 
> Â  
> So a few weeks ago a did a photo shoot involving my hawk-modded EX800, and the synth was jostled around more than it's used to, I'm sure. Now, when I power it on, the display reads ERROR 6 after the initial boot. It does this only momentarily before going to patch 11 of whatever bank I have selected. I only have patches loaded on banks 1 and 2, but none of the data is corrupted. In fact, the synth seems to be functioning perfectly normal. I'm usually a "leave well enough alone" kind of person, but can anyone tell me what's causing the ERROR 6? I have the most recent version of the firmware loaded (2.5.5). The user manual only lists errors 1-5!
> 
> Thanks!
>