Maybe I should have been more clear. After printing out and using the Parameter Quick Reference sheets, I'd assumed (dangerous, I know) that by just assigning the corresponding CC# of the parameter I want to edit to a knob on the controller, that was all it would take. For example, the chart shows CC#24 for filter cutoff, so I thought that assigning knob 1 to CC#24 was all I needed to do. Evidently that is not the case.
Please excuse my ignorance in this area... I've never really used or set up a controller before.
But let's go back to the filter cutoff for a second here. What would need to be done then to set up a knob on a controller to handle cutoff? The manual says, in the MIDI CC Non Registered Parameter Number Method section, to "Send CC#99 with data value matching Global Parameter 16... Then send CC#98 with data value set to desired target parameter... Then send CC#6 with data value set to desired target value." The controller I have only allows one CC# to be assigned to any one particular knob or slider, so I don't see how this could work. Am I overlooking something glaringly obvious here?
Thanks for the help.