your best best for crimping and removing the stem are round nose long pliers. https://www.amazon.com/Beadthoven-Jewelry-Looping-Wrapping-Platinum/dp/ B01J51FYAA?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo- ffnt-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B01J51FYAA The radius must fit inside the stem flange! Don't try to use larger round nose, they won't work. I bought a small pair specifically for this. /Mike On Thu, 2019-08-29 at 06:20 +0000, domgoold@... [korgpolyex] wrote: > ok, so i found out how to get the black cage off - had to use fine > penknife blade to unclip the side retainers. > that went ok on this first one. but i'm going to have to watch that > vid again, because i'm having no joy pinching > the white button mechanism. not coming out at all :-( ... will report > back on progress... do not want to screw this up, most of these work > reasonably well, so i don't want to end up with worse than before ! >
Message
Re: [korgpolyex] EX-800 button restoration
2019-08-29 by support