hmmm try using a tape deck an old one is what I use with type one cassettes. The only thing I can think is when I used type two the extra bias had to much sound and it wouldnt load. I use an old radio shack tape portable pkayer from the mid 80s I adjust the volume to 7 and it record and plays the sounds well. The sound blasted may have to much highs and not be passing the data . But you say it doesnt even put out a dsound to save noise so if it wont broadcast im not sure either. I just know I had trouble loading and saving and got a old fashined way the old school way works I havent digitized the shit yet so im not sure on that. I just know I used type one tape and type two wouldnt work, Probally wont help but its what workes for my three polys.....
bluecontrabass <splitsun@...> wrote:
yeah, since I replaced the battery it holds the sounds in memory just
fine. I can program them in, save them, turn off the keyboard and
remove the power from it (both battery and wall wart) and when I
power back up everything was just as I left it. I said goodbye to
that old dead battery and soldering in a battery holder from an old
motherboard I had and put in a 1.5V lithium and now the memory seems
peachy. Keep the ideas coming!
--- In korgpolyex@yahoogroups.com, x x <alienxxx2002@y...> wrote:
> when yoiu program a sound and try to save it internally what
happens when you turn the keyboard on and of is the sound you just
programmed saved.Just curious if this thing is working properly
>
> Alien
> bluecontrabass <splitsun@c...> wrote:
>
> Tried that. Ran it out of my soundblaster live cranked all the way
> and then out of my Edirol USB interface and still nothing. It
nearly
> blows my headphones it gets so loud. I am still wondering why I
don't
> see any signal out when I try to save from the keyboard as well.
>
>
> --- In korgpolyex@yahoogroups.com, tab27@d... wrote:
> > The output needs to be LOUD. Crank the volume all the way up and
> see if you can't get it to respond. On mine the LEDs sort of pulse
> when it's receiving data.
> >
> >
> > ----- Original Message -----
> > From: bluecontrabass <splitsun@c...>
> > Date: Wednesday, October 6, 2004 2:25 pm
> > Subject: [korgpolyex] Poly 800 MKII
> >
> > >
> > >
> > > Just got the battery replaced on my Poly, and unfortunately it
> > > lost
> > > all of it memory in the process. I never had to use the tape
> > > backups
> > > before, but now its pretty helpful to be able to do that.
> > > Unfortunately, I can't get my keyboard to respond to any kind
of
> > > input. I know that my cable is putting out signal (I hear the
> > > lovely
> > > model-like screetch through headphones and see the voltage on
my
> > > multimeter) but I can't get a GOOD or ERR indication. It just
> > > sits
> > > there and taunts me with the LOAD display. Maybe I'm
> inexperience
> > > at
> > > this, or maybe I'm just dumb, could be both. So I tried the
> > > reverse
> > > by programming a few sounds in by hand and then trying to save
> > > these
> > > to tape. The display says SAVE but I get no output out of the
> > > jack.
> > > I can't see anything on my level meters or on multimeter
> measuring
> > > directly off of the out jack. I have followed my manual and
> tried
> > > a
> > > dozen different cable configurations and patches with the same
> > > result. Am I just this dumb? Help!
> > >
> > > Nate
> > >
> > >
> > >
> > >
> > >
> > > ------------------------ Yahoo! Groups Sponsor -----------------
--
> -
> > > ~-->
> > > Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
> > > Now with Pop-Up Blocker. Get it for free!
> > > http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/QnLolB/TM
> > > ----------------------------------------------------------------
--
> -
> > > -~->
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
>
>
>
>
> Yahoo! Groups SponsorADVERTISEMENT
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/korgpolyex/
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> ---------------------------------
> Do you Yahoo!?
> vote.yahoo.com - Register online to vote today!
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/korgpolyex/
To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
