Korg Poly800/EX800 Users

Hi JB,

It may take 1 or 2 hours, costs approx. 15 EUR or US$ (maximum!) and it is
absolutely worth it!

Maybe you take a look in the pictures section, modification department.
There are photos of the hardware (pots, knobs, switches), the wiring, the
schematics and the way to build it in.

If you know a little bit about electronic devices and soldering it should be
no problem.
Take a look at there and post again if you need further information.

Best regards,

Olaf

----- Original Message -----

From: "jeanbruno valiquette" <sifkasifka@...>
To: <korgpolyex@yahoogroups.com>
Sent: Sunday, November 03, 2002 6:51 PM
Subject: [korgpolyex] (unknown)


>
> I need feedback on the Moog Slayer mods, anyone tried it, how hard is it?,
> cost and all info would be greatly appreciated, thank you!
> JB
>
>
>
> _________________________________________________________________
> Surf the Web without missing calls! Get MSN Broadband.
> http://resourcecenter.msn.com/access/plans/freeactivation.asp
>
>
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>

Thanks for the info!This modification seems to be very easy but i 
think that it's ok to leave the resistor and diode untouched.

Does anybody know who is the owner of this dark blue Poly 800?
http://f3.grp.yahoofs.com/v1/8LMqQOuli4hWdwwn3Ln13G1nsnC5_CGTpacvJ-
csjgkyjY_ApeEX0hTCo3fmc5MXvV-vQ7th-dAR80Pa9mUBrGnMxL-
pJblaURU/poly800dblu.jpg 
The one that is in the files section...
I want a few notes on painting the Poly!
A dark pchyhedelic color will make my synth look good and sexy :)

Thanks in advance
Nick