Yahoo Groups archive
Thread
2011-07-05 by 7yash
I couldn't hear the chorus effect through the headphone jack at all. Is that normal? If I use the separate audio outs, the chorus effect can be heard although it's not very pronounced. Is this normal or do I have a malfunctioning Chorus board? Yash
2011-07-05 by billmeirelles@uol.com.br
I couldn't hear the chorus effect through the headphone jack at all. Is that normal?
If I use the separate audio outs, the chorus effect can be heard although it's not very pronounced.
Is this normal or do I have a malfunctioning Chorus board?
Yash
2011-07-05 by Josh Nursing
Mine is a Poly 800 II so I don't know exactly how the MkI works,
Em 05/07/2011 19:03, 7yash < josh.nursing@... > escreveu:
but it seams like a strange behavior, have you tried to change
the chorus settings? Usualy chorus effects works well with a
50% dry / 50% wet ratio.
I couldn't hear the chorus effect through the headphone jack at all. Is that normal?
If I use the separate audio outs, the chorus effect can be heard although it's not very pronounced.
Is this normal or do I have a malfunctioning Chorus board?
Yash
2011-07-05 by billmeirelles@uol.com.br
In the Mk1, there's only a Chorus board, no delay as in the MkII. The only setting you have per program is turning off or on the Chorus.
Mine is a Poly 800 II so I don't know exactly how the MkI works,
Em 05/07/2011 19:03, 7yash < josh.nursing@... > escreveu:
but it seams like a strange behavior, have you tried to change
the chorus settings? Usualy chorus effects works well with a
50% dry / 50% wet ratio.
I couldn't hear the chorus effect through the headphone jack at all. Is that normal?
If I use the separate audio outs, the chorus effect can be heard although it's not very pronounced.
Is this normal or do I have a malfunctioning Chorus board?
Yash
�
�
2011-07-05 by Josh Nursing
There's no adjustment procedure in the service manual?
Maybe the effect is to soft for you to hear on the headphones,
the chorus may need adjustment, twisting some VRs on the
chorus board after reading the procedures on the service manual
may do the trick...