Yahoo Groups archive
Thread
2014-04-19 by <karl_kling@...>
2014-04-20 by <backshall1@...>
Yes, this is correct. If the resonance parameter is set to 0 then the knob can’t to anything. It just controls resonance from 0 up to the parameter value. Of course, the max value will now cause much higher resonance than was previously possible, so you probably want to keep it below 15, maybe 13 max. Don Backshall
From: karl_kling@... Sent: Saturday, April 19, 2014 6:43 PM To: korgpolyex@yahoogroups.com Subject: [korgpolyex] Poly800 Resonance dependent on parameter value. Hey everyone, First post here. I've got my filter mod someone complete but am running into the issue of the resonance still depending on the parameter value. Is this correct? Doesn't seem it should be since the Cutoff isn't like that. Thanks in advance! -Karl