The Logic Off Topic list

Hi Gilles,

> my converters did not lock
> anymore to the clock of the Hammerfall (clock source still on optical
> on the
> converters and Hammerfall selected as Master) & there was no sound
> coming
> out (neither with Soundforge & Rebirth). I checked the control panel
> of the
> Hammerfall, but still everything was alright.

Are you sure it wasn't set to SPDIF or so? I once forgot that I had put
the audio output of Soundforge on SPDIF and in the driver I had set the
SPDIF to ADAT. So signal was going out, but it wasn't what I wanted it
to be... :-)

> Then I put the converters as the master clock, and put the Hammerfall
> on
> Autosync: now it worked and the Hammerfall did sync/lock without a
> problem.

That's ok.

> Then I switched the converters back to clock source "optical", leaving
> the
> Hammerfall on autosync, again no lock (& sound!!).

Of course not, since there's no master! You have to set the convertor or
the Hammerfall to master... no master clock means asking for trouble.

> Is there a possibility
> that the converters are a little bit "f*)(//+"%ç" up, or is it perhaps
> the
> Hammerfall??

I don't think it's a hardware problem. Send me a screenshot of your
Hammerfall driver and I'll take a look at it. I think that's the cause.
Or maybe it's just the cable???? Or maybe you're trying to play back at
the wrong sampling frequency?

Sorry I can't help more than this. TIP: there's a newsgroup for RME
products now! Go to the www.rme-audio.com website and follow the link to
the newsgroup. RME is very responsive.

Bye,
Joeri

--
Joeri Vankeirsbilck
joeri@...

Belway Productions      -     http://www.belway.com
List-admin   Logic-users/SoundD*ver-users/Logic-TDM



[Non-text portions of this message have been removed]