[OT] RME news (multiface shipping date + ADI8-DD)
2001-09-22 by Joeri Vankeirsbilck
These mails were posted by Matthias Carstens at the RME forum: Hello, first of all: I want to deeply apologize for the long and windy road the Multiface has taken so far. The whole HDSP and also ADI-8 DD development was delayed in a way we would never thought it would be possible. After the long delay until the ADI-8 Pro was finally shipping we thought 'let's take this as lesson and be much more careful with shipping dates in the future'. We got another lesson... At NAMM in January I personally demoed a working CardBus and Digiface, and demonstrated it with Nuendo and extreme low latencies, running the non-optimized business (!) notebook of our US distributor. We really thought 'this was the last test, this stuff is ready to be shipped'. Well, ever heard of Murphy? Two weeks later we found a notebook which did not work. Then another, then another...you get the story. After doing a lot more research and fixing some bugs, but also implementing a lot workarounds for the *#!?:-( type of laptop, we decided to again stop it and do some more field tests. Most of you know the result, found on our website as Tech Infos. Finally, we were informing our customers BEFORE the product was available, what problems they might have to face with their notebook, and why. At least this is a very positive aspect of the delay-issue. Digiface finally shipped, but the Multiface was now delayed as much as the Digiface was. Additionally we had reached summer, many companies were in holidays (even we ourselves - delay...hmmm, not me...I have to think about this again...). When trying to further improve the Multiface we had to search for better components, which were not hard to get...but not sooner than in 4 to 6 weeks...something like this can delay a development extremely. As most of you know I finally refused to give any date anymore, because after all this unexpected mess I was sure it would come even more worse as soon as I give another date. But now my hope is back. I have a fully functional and tested Multiface in front of me, which will be taken into production next week. STOP! This does not mean that the Multiface will show up in your local store in two weeks! Sorry. This does mean that everything needed for a continous production run will be organized. Normally this means about 8 weeks until the first devices leave the factory. Fortunately, thanks to the long delay (I never thought I would say this) most of the time-critical components are already in our stock. Therefore I expect the first Multifaces to ship in about two to three weeks. Thank you all for your continued support. We are sure that you will like it and that you will finally agree: it was worth the wait. Regards Matthias Carstens RME - Hello all, I would like to take this opportunity (the Multiface mail) to introduce the ADI-8 DD. You think you know it? Don't be too sure...it has changed a lot within the last weeks. The ADI-8 DD is shipping since this week, and ships world wide next week. You can find all information about this Format and Sample Rate converter on our website, the manual is also helpful to get a picture of all included functions. The ADI-8 DD has turned into a 16-channel 24 bit/96 kHz Dual Universal Format Converter. We are very sure that this device is a MUST for every semi- or profesional studio, as it allows so many functions which are needed all the time, but poorly adressed by all the format and sample rate convertes available. We would also like to make you aware of some typical application examples (in addition to the 12 mode list shown on the web). These are: AES/EBU frontend for RME's digital I/O cards TDIF frontend for RME's digital I/O cards AES- and ADAT frontend for DTRS machines Serves as 8-channel AES, TDIF and ADAT I/O for all digital mixing desks with ADAT or TDIF port Allows to operate 4 SPDIF or AES devices, no matter which sample rate or clock reference those use, on every digital network Note that you can use as many devices as you want (can afford [;-)] , to convert an un-limited number of channels in sample-synchronicity. Thank you Matthias Carstens RME -- Joeri Vankeirsbilck joeri@... Belway Productions - http://www.belway.com List-admin Logic-users/SoundD*ver-users/Logic-TDM [Non-text portions of this message have been removed]