The Logic Off Topic list

Hi

I just upgraded my OS from OS Jaguar to OS Tiger 10.4.6
What was working in Jaguar no longer works in Tiger.
My serial port (connected to the original MTP) is not recognized by  
L7.1.1
and my AW8 sound card is not recognized.
Any ideas on how to get these elements working together?

Thanks,
Jim

--- Jim Seaman <jseaman@...> wrote:

> Hi
> 
> I just upgraded my OS from OS Jaguar to OS Tiger
> 10.4.6
> What was working in Jaguar no longer works in Tiger.
> My serial port (connected to the original MTP) is
> not recognized by  
> L7.1.1
> and my AW8 sound card is not recognized.
> Any ideas on how to get these elements working
> together?

Unfortunately, I don't think serial ports will work
with your new set up.
JP

Message posted by Michael Doyle <mickeyd1@...>:

Jim Seaman <jseaman@...> wrote:
> Hi

> I just upgraded my OS from OS Jaguar to OS Tiger 10.4.6
> What was working in Jaguar no longer works in Tiger.
> My serial port (connected to the original MTP) is not recognized by  
> L7.1.1
> and my AW8 sound card is not recognized.
> Any ideas on how to get these elements working together?

> Thanks,
> Jim

Hi Jim.
I have a system with Audiowerk 8 card [rev A board I think] and Griffin gPort serial port with Opcode Studio 64x midi interface.
I recently performed same upgrade using Archive and Install option. I then re-installed Audiowerk 8 OS X driver and gPort drivers and both Audiowerk 8 and serial port are both recognised and working fine with 10.4.7 and Logic Pro 7.1.1 and subsequently 7.2.1.
Hope this helps.

Michael.