Lpc2000

petermccormick1 wrote:
> We have used Keil Uv2 (assemblers & C) and Ceibo emulators & 
> programmers for the 87C554 family of chips for years.  The 87C is 
> great but it is becoming an antique.  We are migrating to the LPC2114 
> and have purchased the Keil Ulink and MCB2100 to ramp up.  Keil does 
> not seem to have much sample code to work with the MCB2100 for 
> starters.  Are there any web sites with code, flash programming 
> examples, UART, Hello world.... examples so the learning curve isn't 
> quite so steep?

The MCB2100 stuff does come with an example, called Blinky. There's two 
versions - one that reads from the ADC to flash the LEDs at a rate 
controlled by the analogue in, which outputs to UART1 the current ADC 
reading at regular intervals, and another that doesn't do this but 
instead uses a timer interrupt.

The timer version is at:

http://www.keil.com/download/docs/lpc2100_blinky.zip.asp

The ADC version was on the installation disk somewhere... look for a 
directory called Examples under c:\keil

> 
> Thanks, Peter
> 

ABS