Lpc2000

At 11:58 AM 12/8/05 +0000, phlpcmicro wrote:
>We have built a few  boards with LPC2104's and 1 or 2 are not
>powering up and are hanging after power up.

How so?  Do they just never start? Can you perform an ISP operation on them>

>We scope the 1.8v and 3.3v and the waveforms seem to be consistently
>power fast and together.


Within reason there don't appear to be any power sequencing issues on these 
micros.

>has any on had power up problems on the 2104?
>
>Is there anything to watch for? as there are no power up timing
>diagrams in the data sheets for 1.8v and 3.3v.

The biggest thing to watch for is have you inadvertently put the processor 
in ISP mode by having the ISP pin low on reset?

>Could it be something else? PLL  Xtal?  Glitches in to the IO?
>
>a reset seems to kick it in to life.


That might suggest a low rise on the ISP pin or a bad power-on reset 
circuit.  You do use a 'real' power on reset circuit?

Robert

" 'Freedom' has no meaning of itself.  There are always restrictions,   be 
they legal, genetic, or physical.  If you don't believe me, try to chew a 
radio signal. "  -- Kelvin Throop, III
http://www.aeolusdevelopment.com/