Lpc2000

--- In lpc2000@yahoogroups.com, Alaric B Snell <alaric@a...> wrote:
> redsp@y... wrote:
> 
> > 
> > I would suggest that you assign pin numbers for clarity and so that
> > everyone uses the same numbers.  I made a comment on the wiki that you
> > can read (and remove).  
> > 
> 
> Heartily agreed, and acted upon ;-)

As long as everyone is open to suggestions, I think a change to the
pinout might be useful.  If you ignore the pin one mark (or it is
missing or the cable is made backwards) and your connector is not
plugged, you can still plug the cable on backwards.  With power and
ground on opposite corners this can do some real damage.  If you put
3.3 volts on pin 1 instead, it will connected to the missing key pin
when backwards and no damage should be done.  

I added this suggestion to the wiki, too.