Thanks leon,
I tried the hex file that you sent me.
I read 4293984050 part ID and 1.3 bootloader ID, when I click Upload
to Flash, it
does not give any error messages, a progress bar shows it is
uploading.
When I click Compere Flash, a progress bar shows it is reading but
"File compare Fail"
message appears at the end.
And there is no data coming from chip when I check it with terminal
window...
?
----- \ufffdzg\ufffdn \ufffdleti -----
Kimden : lpc2000@yahoogroups.com
Kime : lpc2000@yahoogroups.com
G\ufffdnderme tarihi : 21/02/2004 11:52
Konu : Re: [lpc2000] LPC2106 Programming - ISP and hex file
----- Original Message ----- From: "gokbektas" <gokbektas@...> To: <lpc2000@yahoogroups.com> Sent: Saturday, February 21, 2004 9:33 AM Subject: Re: [lpc2000] LPC2106 Programming - ISP and hex file > -I programmed chip with Philips ISP > -Then closed ISP program > -Opened terminal window in crossworks > -Selected com port and baud rate > -Opened com port in terminal window > -Then removed the bootloader jumper > -Pressed reset button... > > there is nothing... may be I should check soldering of the chip again (I did it myself) > > Could anyone send me a tested hex file for testing uart or pins @ 10MHz for LPC2106? I sent the hex file I used. I checked with the CrossWorks terminal utility (I was using RealTerm) and it worked OK with that. Leon ------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511 http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dN_tlB/TM ---------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/lpc2000/ <*> To unsubscribe from this group, send an email to: lpc2000-unsubscribe@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/