Lpc2000

On Monday 26 December 2005 04:32, rtstofer wrote:
> For the 2294, the current boot code is at least ver 1.63 and CRP
> wasn't implemented until ver 1.60.  Is there a T command in the
> latest version of the boot code for the 2294?  If not, the question
> above is irrelevant.  And that is the issue - there is not one shred
> of evidence that the boot code, as implemented, doesn't work as
> described in the datasheet and errata.
I have a LPC2294 with boot code version 1.63, and it implements the 'T' 
command. I've quickly checked through the corresponding code, and it does 
access a GPIO register (E0028000), as Jaya said. Haven't had time to look 
further into it.

Regards,

Dominic