Lpc2000

--- In lpc2000@yahoogroups.com, Tom Walsh <tom@o...> wrote:
>
> wzzxo wrote:
> 
> >Hello,
> >
> >I'm having trouble using an LPC2294 with the gnu tools.
> >My board is an LPC-H2294 from Olimex, and I'm trying to follow the
> >tutorial "ARM Cross Development with Eclipse" from James P. Lynch.
> >As there are some differences between the LPC2106 board used in 
the
> >tutorial and mine, I did the following changes in the
> >demo2106_blink_flash project :
> >
> >  
> >
> There has been mention of Olimex documentation not matching the 
boards.  
> Others have seen the documentation + schematic show that LEDs are 
on one 
> pin but are actually on another on the board. 
> 
> Perhaps you could check the schematic they gave you to verify that 
the 
> pin they say is connected to the LED actually goes to the LED.  
Never: 
> AssUMe.
> 
> TomW
> 
> 
> 
> -- 
> Tom Walsh - WN3L - Embedded Systems Consultant
> http://openhardware.net, http://cyberiansoftware.com
> "Windows? No thanks, I have work to do..."
> ----------------------------------------------------
>

Good point!  I'm one of the ones that mentioned the problem re: the 
LPC2106.  The paper schematic is wrong but the silkscreen on the 
board is correct.

Richard