Lpc2000

----- Original Message ----- 
From: "derbaier" <dershu@...>
To: <lpc2000@yahoogroups.com>
Sent: Tuesday, December 27, 2005 11:53 PM
Subject: [lpc2000] Re: Wiggler and Keil


> --- In lpc2000@yahoogroups.com, "tsvetanusunov" <tusunov@m...> wrote: 
>> 
>> I found yesterday this web site: http://twentyone.blogchina.com/
>> this guy with nick twentyone works on this RDI support for Wiggler 
>> since year 2004 (the first project was called X-JTAG) and his last 
>> release is made very recently 20/12/2005.
>> I'm going to check if it works with our ARM-JTAG today, if it works 
>> this means our ARM-JTAG (Wiggler) finally will be supported by all 
>> debuggers who have RDI1.51 support, there are instruction how to 
>> config Keil, IAR, STD, ADS to work with his DLL.
>> The best of all is that the source is opened and can be downloaded 
>> freely from this web so support for other hardware can be implemented 
>> easily.
>> 
>> Merry Christmas and Happy New Year to all LPC2000 members!
>> 
>> Tsvetan
>> ---
>> PCB prototypes for $26 at http://run.to/pcb 
>> (http://www.olimex.com/pcb)
>> PCB any volume assembly (http://www.olimex.com/pcb/protoa.html)
>> Development boards for ARM, AVR, PIC, MAXQ2000 and MSP430  
>> (http://www.olimex.com/dev)
>>
> 
> Tsvetan, were you able to get H-JTAG to work in your setup?
> 
> I followed your link and picked up the software to try out with the
> Olimex Wiggler clone that I have. I tried it with two different LPC
> chips and just got it's "Unable to find target" error message.
> Sometimes it was able to reset the target and sometimes it could not.
> It never was able to work with the ARM SDT2.51 debugger.

If that software has a speed setting, try reducing the speed.

Leon