Lpc2000

Hi Dave,
    I think you need to configure SDT debugger to work with H-JTAG.
The image is loaded ok and after SDT sends an error message "Too many
breakpoints"
To avoid this error you need to disable the vector
catch and semihosting in debugger setting.
I don´t know how this can be done. 
Regards,
         Marcio 

> So far, H-JTAG does not work with ARM SDT2.51 either, so it's problem
> is not JUST with Keil. Using an Olimex LPC2148 board and an Olimex
> Wiggler clone, the H-JTAG server reports "Unable to find target", so
> in this case, it can not work with ANY debugger. Earlier in this
> thread Tsvetan said "the H-JTAG as is will not work with our ARM-JTAG
> as it doesn't handle the JTAG-ENABLE pin we have on our JTAG".  If
> that is the ONLY problem with H-JTAG it should be simple fix to get it
> going with the Olimex hardware??
> 
> FWIW, the H-JTAG.sys driver that provides direct port access under
> Windows seems to be working fine.  It is a derivative of Dale Robert's
> GiveIO.sys driver, so I tested it with Dale Robert's TestIO code, and
> it played the test tune on the PC speaker correctly.
> 
> 
> -- Dave
>