Lpc2000

Dave your observations seem to comfirm what Tsvetan
reported.
I expect that Olimex will soon release an updated
version of H-JTAG that will work fine with  Wiggler
clones.

Regards,
Viron.

...
> Unfortunately, I am not getting far enough for that
> error.  :-(
> When I start the H-JTAG server it displays "UNKNOWN
> 0x00000000", and
> then "Unable to find target" if I click the "Detect
> Target" menu item.
> If I disconnect the Olimex Wiggler from the PC cable
> the H-JTAG server
> displays "UNKNOWN 0xFFFFFFFF". 
> 
> If I just go ahead and try to run ADW in the SDT
> tools it produces the
> error message "H-JTAG server is not ready. Please
> make sure the
> hardware is properly connected and powered up".
> However, I know the
> hardware is OK because the Olimex Wiggler works OK
> with the IAR demo
> toolset.
> 
> I recall that Tsvetan said in an earlier post that
> "the H-JTAG as is
> will not work with our ARM-JTAG as it doesn't handle
> the JTAG-ENABLE
> pin we have on our JTAG." He also said it should be
> easy to fix, so I
> am hoping that H-JTAG will work with the Wiggler
> real soon now. :-)
> 
> FWIW, I have several other debug options. It is just
> that it would be
> really nice to have a nice low cost RDI debug setup
> for SDT2.51. I
> have used SDT for nearly 10 years now with
> Lauterbach hardware, and I
> am kind of attached to it!  :-)  Since I retired, I
> no longer have
> access to the expensive Lauterbach hardware.  :-(
> 
> 
> -- Dave
> 
> 
> 
> 
> 



	
		
__________________________________ 
Yahoo! for Good - Make a difference this year. 
http://brand.yahoo.com/cybergivingweek2005/