Lpc2000

--- In lpc2000@yahoogroups.com, "atmelbr" <atmelbr@y...> wrote:
>
> Hi again Dave,
>     H-JTAG is now working with ARM SDT2.51 debugger!! 
> Congratulations for twentyone.
> You need to disable semihosting and vector catching.
> Click on View->Debugger internals
> On semihosting enable put 0x00000000
> On vector_catching change the string 
> %RUsPDAifE to %ruspdaife
> 
>      I am using a very simple home made wiggler.
> See schematic on files area.
> http://groups.yahoo.com/group/lpc2000/files/JTAG/
> 
> 1. Put a jumper from pin 8 to pin 15 of DB25 connector.
> 2. Use 74HC244 chip.
>      Good luck and happy new year.
> 
> 
Thank you very much for this further information!  Unfortunately, it
is not possible to get to the View->Debugger Internals menu with
H-JTAG selected as the debug channel. ADW displays the message "H-JTAG
server is not ready", and will not continue with ADW startup until
H-JTAG is responding correctly. Since IAR also reports the exact same
error message when the H-JTAG RDI debug channel is selected, I assume
the error message is generated by H-JTAG itself. The H-JTAG server
itself also generates an error message on startup, so everything comes
back to H-JTAG and the Olimex Wiggler.  Since your Wiggler does seem
to work OK with H-JTAG, there must be a difference in these Wiggler
implementations causing the problem. Since Tsvetan has already
indicated that he knows what the problem is I hope that he and
twentyone can get together on a solution? It would be a great addition
to our community if H-JTAG and the Olimex Wiggler can be made to work
smoothly together. It would also be really great if H-JTAG would also
work with the EasyICE JTAG pod, since it is almost, but not exactly,
the same as the Wiggler. I tried to set up an EasyICE using H-JTAG's
user defined configuration option, but the correct pin assignments are
not available in H-JTAG's user defined menu.


HAPPY NEW YEAR!!!

-- Dave