Lpc2000

This gleaned from  agoogle for J1850 COMMANDS. tHE 808 MENTIONED IS A 
gENERAL mOTORS hOLDEN (aUSTRALIAN) vehicle.

maybe this will be of some help.

Cheers

Al

>
>Bruce
>The fault code 22 you saw was TPS voltage too low.
>My manual says that this code is set if TPS voltage falls below 0.15V
>
>Here is a list of all 808 Fault codes.
>
>12    System Functioning OK
>13    Oxygen sensor Open Circuit
>14    CTS low ( <0.7V)
>15    CTS High (>4.65)
>21    TPS High (>2.5V and MAP <60kPa fot 2 secs)
>22    TPS Low (<0.15V)
>23    MAT High (>4.9V)
>24    VSS Error
>25    MAT Low (<0.3V)
>33    MAP High 
>34    MAP Low
>41    No Refrence Pulse
>42    EST Failure
>43    Knock Sensor open or shorted
>44    Oxygen sensor low (<0.25V, >20Sec)
>45    Oxygen sensor high (>0.45V, >20Sec)
>51    MEMCAL Error
>55    A to D error (>5.5V)
>
>Hope that this helps
>Cheers
>Matt



Greg Deuerling wrote:

>>-----Original Message-----
>>From: lpc2000@yahoogroups.com [mailto:lpc2000@yahoogroups.com] On Behalf
>>Of Randy M. Dumse
>>Sent: Friday, January 06, 2006 3:37 PM
>>To: lpc2000@yahoogroups.com
>>Subject: RE: [lpc2000] Re: J1939 stacks for the LPC2xxx's?
>>
>>    
>>
>>>Do you know anything about J1850 (OBDII)?
>>>      
>>>
>>What do you need to know? I've done keyword protocol.
>>
>>Randy
>>www.newmicros.com
>>    
>>
>
>I'm a "me too" on this topic :)
>
>Is there any documentation out there on how to get info from an OBDII port?
>I had a OBDII scanner hooked up to a Ford truck at one time and was able to
>figure out a few commands like oil temp, tran temp, ...  It would be nice if
>there was a document that covered all of the commands.  I've Googled quite a
>bit on the subject and have come up with nothing.
>
>Thanks for any info you could give out!!!
>
>
>Greg Deuerling
>
>  
>
>>-----Original Message-----
>>From: lpc2000@yahoogroups.com [mailto:lpc2000@yahoogroups.com] On Behalf
>>Of Randy M. Dumse
>>Sent: Friday, January 06, 2006 3:37 PM
>>To: lpc2000@yahoogroups.com
>>Subject: RE: [lpc2000] Re: J1939 stacks for the LPC2xxx's?
>>
>>    
>>
>>>Do you know anything about J1850 (OBDII)?
>>>      
>>>
>>What do you need to know? I've done keyword protocol.
>>
>>Randy
>>www.newmicros.com
>>
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>    
>>
>
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>  
>