Lpc2000

I have been using the Ashling EVBA7 board with the soldered on 
LPC2106 and using the Ashling GNU development tools with their 
excellent debugger Pathfinder. 

After developing with this combination for several months I have run 
into a memory problem. So I requested and have now received several 
LPC2214 chips and a 144 Pin adapter for the EVBA7. I also ordered 
and received a new EVBA7 development kit this week which contains 
the latest version of the Ashling development software version 1.12. 
While the Ashling web site infers this version of the development 
software supports the new LPC22xx chips it seems to be missing some 
stuff.

I have removed the soldered LPC2106 from the EVBA7 and installed the 
144 Pin adapter. The Philips ISP utility will see the new LPC2214 
perfectly and Pathfinder will load and run but I can't flash or even 
check the device status in the Pathfinder flash utility. I reviewed 
the source for the flash utility and it does not seem to have any 
support for the LPC2214.

I also did not receive any instructions at all on the proper 
installation and use of the 144 pin adapter so I am only guessing on 
the proper jumper settings.

Does anyone have instructions and/or more recently updated that 
supports the 144 pin adapter and the LPC2214 using Pathfinder?

Thanks
Rick